IS300 Project in progress *pic*
#1
Driver School Candidate
Thread Starter
Join Date: May 2008
Location: nevada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
IS300 Project in progress *pic*
just posting up a pic of my 02 is3 in progress im doing the suspension next week (Tanabe Sustec pro) rear camber kit and spacers. Put the wheels on last night to test fit them....yea...i need to roll my fenders lol.
all comments are welcome =)
all comments are welcome =)
Last edited by VegasMade; 03-03-10 at 03:41 PM. Reason: Sorry about the huge pic idk how to resize
#6
Driver School Candidate
Thread Starter
Join Date: May 2008
Location: nevada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, same here i waited 3 months for these wheels! lol
Trending Topics
#9
Driver School Candidate
Thread Starter
Join Date: May 2008
Location: nevada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Westside las vegas.Where did you move from?
#10
Lead Lap
Join Date: Jun 2005
Location: Baltimore - Las Vegas
Posts: 3,779
Likes: 0
Received 0 Likes
on
0 Posts
#12
Driver School Candidate
Thread Starter
Join Date: May 2008
Location: nevada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
#15
Pole Position
iTrader: (4)
I am talking about shorter springs FOR the Tanabe coilovers. I was only able to go that low because I bought springs (made by Tanabe) that were about 30mm shorter than the ones they came with. I also had Tanabe Sustec Pro coilovers
https://www.clublexus.com/forums/is3...0-springs.html
https://www.clublexus.com/forums/is3...0-springs.html