splat's elite supercharger build
09-13-10, 08:01 PM
#93
Advanced
. I took a few nice pics of your car at the elite autosport spring open. I bet it's a monster now 
09-19-10, 07:24 AM
#97
Lead Lap
Thread Starter
iTrader: (3)
Join Date: Feb 2009
Location: Doral,FL
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
they just got the cnc machine up and running and are making the pulley's should be soon, last goal i heard was for me to have the car at the end of the month.
09-19-10, 08:37 AM
#98
Lexus Champion
Join Date: Jun 2007
Location: Aventura, Florida
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
09-20-10, 08:33 AM
#101
Driver School Candidate
Join Date: Feb 2010
Location: NY
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Ive been talking to the guy he has a greddy gs430 kit which looks identical to the kit that was on that 0-60 car. appears that they modified the intake manifold lower section to bolt it to the isf. im in the process of comparing the intake gaskets to see how much modifications are needed.....then you just need a pulley/idler kit made.
09-20-10, 09:56 AM
#102
Lead Lap
Thread Starter
iTrader: (3)
Join Date: Feb 2009
Location: Doral,FL
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Ive been talking to the guy he has a greddy gs430 kit which looks identical to the kit that was on that 0-60 car. appears that they modified the intake manifold lower section to bolt it to the isf. im in the process of comparing the intake gaskets to see how much modifications are needed.....then you just need a pulley/idler kit made.
10-07-10, 05:09 AM
#103
Lead Lap
Thread Starter
iTrader: (3)
Join Date: Feb 2009
Location: Doral,FL
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Woke up this am to a nice update and some tagged photos. so here you go!!!!!!!
It has been awhile since I have given an update about the blower build, so here it goes!
We finally finished the design for the idler pulley bracket perfected, and we just cut out the proto type pulley.. We need to make a few changes and then we will make the final production pulley.. It should be about a 6psi pulley. All we have left now is the injector driver brackets and finish fabricating the plenum. Not too much longer!!!
Here are some pics!
We finally finished the design for the idler pulley bracket perfected, and we just cut out the proto type pulley.. We need to make a few changes and then we will make the final production pulley.. It should be about a 6psi pulley. All we have left now is the injector driver brackets and finish fabricating the plenum. Not too much longer!!!
Here are some pics!
