When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
if anyone cares heres my build thread (supraforums) pics added
so my main thread is in sf but basically my car is already stripped completely, getting caged, minimal interior just seats and a dash, motec, 2 gt2871r's built 1.5jz and supporting mods for aprox. 600 whp. it will be tracked or drifted more likely tracked. http://www.supraforums.com/forum/sho...d.php?t=525199
Ohh you know I care! Im hoping to do a 1.5J sometime in the near future. Ive got the 1J. I want to build the 2JGE block and bolt it on. Anyway, where are the pictures?
Ohh you know I care! Im hoping to do a 1.5J sometime in the near future. Ive got the 1J. I want to build the 2JGE block and bolt it on. Anyway, where are the pictures?
of the car or the engine? i'm posting all my stuff on sf and will update this one with links
I need one of those "this thread is worthless without pics" smileys like they have over on SF. But yeah I'll keep checking in. I just looked through it on SF and looks like things are finally jumping off. Keep it up!
1.5jz always catches my interest sorry if i missed but is it the n/a or tt block your using?
using a built na block stock tt compression though, .20 over custom pistons from titan made by je, machined for larger cams and valves scat rods blah blah the list goes on as the bank account gets smaller oh, 10pt cage motec status seats still need to source a v160 and lsd
very nice setup, is it running yet? very interested in spool-up times on those GT2871Rs...was contemplating disco potatoes on a 1JZ setup.
yea i was also lookin at the disco's aka 2860r's but i figured with the increased displacement 3.0 the spool would be good pretty good with the 71r's. it's not running yet hopefully next summer... motec is like 4k for the m600 not including tuning and sensors and crap.... i think this setup will have a real nice spool and lots of power potential, both turbos are capable of flowing 400hp a piece they are larger than the direct bolt on upgraded rb26 skyline turbos. there are a few members on sf that have similar setups but with smaller turbos running the 2.5. check out bic performance for some insight on this stuff.
here i'll post the stuff from his site.
10 psi 3k rpm full boost 20psi 3800 rpm about 390 rwhp @ 15psi and 502 rwhp 22 psi on pump gas good stuff for a 2.5 liter 1jz.. using the 2860r's discopotato's
here i'll post the stuff from his site.
10 psi 3k rpm full boost 20psi 3800 rpm about 390 rwhp @ 15psi and 502 rwhp 22 psi on pump gas good stuff for a 2.5 liter 1jz.. using the 2860r's discopotato's