How long should I wait to wax my 3IS?
#1
Rookie
Thread Starter
Join Date: Oct 2013
Location: In the sky...
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
How long should I wait to wax my 3IS?
Hi, All–
I have had my 3IS for about a month now and have washed it about two times (hand washed with Meguiar's products). I haven't wax it yet and I was wondering how long should I wait? I have heard that I shouldn't detail the car for at least a couple of months? I would like to get one good waxing in before the winter hits.
I have had my 3IS for about a month now and have washed it about two times (hand washed with Meguiar's products). I haven't wax it yet and I was wondering how long should I wait? I have heard that I shouldn't detail the car for at least a couple of months? I would like to get one good waxing in before the winter hits.
#4
#5
Lexus Test Driver
No need to wait to wax. That's now an old wise tale, like changing oil every 3k miles. Things have changed and progressed.
They way to tell if it needs it is by touching it. Smooth and slippery? Or slow and friction?
They way to tell if it needs it is by touching it. Smooth and slippery? Or slow and friction?
#6
Not if the paint hasn't been baked it isn't a wise tale. Paint will come off on your waxing sponge / rag.
Trending Topics
#8
Auto Detailing Master
iTrader: (2)
There is clearly a LOT of misunderstanding going on here......
New cars are baked before they ever leave the factory. Your OEM paint will be fully cured before you take ownership of it. You can AND SHOULD apply a thorough layer of protection (ie wax, sealant or coating) ASAP upon receiving your new car.
Smooth paint does not mean protected paint. Your paint may be smooth to the touch, but that simply shows that it is clean. CLICK HERE to read an article I wrote specifically about how to tell if your paint is protected and to help discuss the basics of waxes, sealants, and coatings.
The idea of seeing paint transfer to your waxing applicator is very rare these days. This used to occur because vehicles were painted using a single stage paint process. This process DOES NOT have any clear coat!
When you rub a single stage paint, you will see some transfer of the base coat onto your applicator. This will happen whether the paint is cured or fresh.
Clear coated vehicles will not display any color transfer to your applicator because the top coat of paint is clear.
New cars are baked before they ever leave the factory. Your OEM paint will be fully cured before you take ownership of it. You can AND SHOULD apply a thorough layer of protection (ie wax, sealant or coating) ASAP upon receiving your new car.
Smooth paint does not mean protected paint. Your paint may be smooth to the touch, but that simply shows that it is clean. CLICK HERE to read an article I wrote specifically about how to tell if your paint is protected and to help discuss the basics of waxes, sealants, and coatings.
The idea of seeing paint transfer to your waxing applicator is very rare these days. This used to occur because vehicles were painted using a single stage paint process. This process DOES NOT have any clear coat!
When you rub a single stage paint, you will see some transfer of the base coat onto your applicator. This will happen whether the paint is cured or fresh.
Clear coated vehicles will not display any color transfer to your applicator because the top coat of paint is clear.
Last edited by zmcgovern4; 10-17-13 at 07:40 AM.
#10
Auto Detailing Master
iTrader: (2)
Yup, sure have. My dad's acura had a tri-coat paint job with a tinted clear coat.
Even this tinted clear should not show any transfer during waxing. Wax is a non-abrasive product (unless you are using a cleaner wax that contains mild abrasives) and therefore should not be removing any material as you are applying it to the paint.
I did see some color transfer while cleaning my polishing pads, obviously, because polish does contain abrasives and works by removing a thin layer of paint.
Here you can see the red transfer to the towel that I used to clean my polishing pad.
Even this tinted clear should not show any transfer during waxing. Wax is a non-abrasive product (unless you are using a cleaner wax that contains mild abrasives) and therefore should not be removing any material as you are applying it to the paint.
I did see some color transfer while cleaning my polishing pads, obviously, because polish does contain abrasives and works by removing a thin layer of paint.
Here you can see the red transfer to the towel that I used to clean my polishing pad.
#12
Lexus Champion
#14
Auto Detailing Master
iTrader: (2)
What do you mean by original wax? A layer of wax that you have previously applied, or do you suspect the factory applied a wax?
I would assume the factory would not go through the process of applying any wax to the surface, the dealership might have "detailed it" prior to your picking it up (unfortunately!), but it would surprise me if the factory implemented any sort of wax procedure before shipping the car.
With that being said, it is always best to remove any existing layer of protection prior to applying a new one to promote a better bond between the paint and the protection, however it is not mandatory .
I would assume the factory would not go through the process of applying any wax to the surface, the dealership might have "detailed it" prior to your picking it up (unfortunately!), but it would surprise me if the factory implemented any sort of wax procedure before shipping the car.
With that being said, it is always best to remove any existing layer of protection prior to applying a new one to promote a better bond between the paint and the protection, however it is not mandatory .
#15
Pole Position
iTrader: (1)
What do you mean by original wax? A layer of wax that you have previously applied, or do you suspect the factory applied a wax?
With that being said, it is always best to remove any existing layer of protection prior to applying a new one to promote a better bond between the paint and the protection, however it is not mandatory .
With that being said, it is always best to remove any existing layer of protection prior to applying a new one to promote a better bond between the paint and the protection, however it is not mandatory .
So before I apply another coat of wax, it's best if I strip it with some dish soap?