^^^^20" AME FX - Ash Metal... Staggered^^^^
#1
Driver
Thread Starter
Join Date: Oct 2007
Location: Bronx, New York
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
^^^^20" AME FX - Ash Metal... Staggered^^^^
AUTO MOBILE ENGINEERING - AME Shallen FX - Ash Metal Finish - two (2) piece construction.
Purchased New on 12/07 and Officially Installed 4/08
4,000 miles
Mint condition... I actually had one (1) front wheel professionally repaired for minor curb rash and bend on outer lip.
Front: 20” x 9” (High Disk) offset: +40mm (Big Brake Clearance)
Rear: 20” x10” (S-Low Disk) offset +40mm
Bolt Pattern: 5x114.3
Actual Pics of wheels a few weeks ago...
Tires: 80% Thread Left used for 4,000 miles
BF Goodrich g-Force T/A KDW II
Front: 245/30/20
Rear: 255/30/20
Asking $3,100 + Shipping (Wheels and Tires)
I'm local to New York City... So any local buyers will have preference.
Purchased New on 12/07 and Officially Installed 4/08
4,000 miles
Mint condition... I actually had one (1) front wheel professionally repaired for minor curb rash and bend on outer lip.
Front: 20” x 9” (High Disk) offset: +40mm (Big Brake Clearance)
Rear: 20” x10” (S-Low Disk) offset +40mm
Bolt Pattern: 5x114.3
Actual Pics of wheels a few weeks ago...
Tires: 80% Thread Left used for 4,000 miles
BF Goodrich g-Force T/A KDW II
Front: 245/30/20
Rear: 255/30/20
Asking $3,100 + Shipping (Wheels and Tires)
I'm local to New York City... So any local buyers will have preference.
#3
Forum Administrator
iTrader: (2)
Vouch received from oohpapi44
Last edited by DaveGS4; 10-17-08 at 06:58 AM.
#6
Driver
Thread Starter
Join Date: Oct 2007
Location: Bronx, New York
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Oohpapi... it's appreciated...
Wheels were actually Purchased through High Society Vip way back... when they were an authorized Vendor here on Club Lexus... Thanks to Mark, Johnny and Leroy on facilitaing the purchase for me...
Wheels were actually Purchased through High Society Vip way back... when they were an authorized Vendor here on Club Lexus... Thanks to Mark, Johnny and Leroy on facilitaing the purchase for me...
Last edited by Rodneyc77; 10-17-08 at 07:34 AM.
Trending Topics
#10
Driver
Thread Starter
Join Date: Oct 2007
Location: Bronx, New York
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
There's a little wiggle room in the price... Not a lot though...
The bolt pattern is the same as your LS... And the fitment should work... But you'll have to verify that on your end to make sure...
The bolt pattern is the same as your LS... And the fitment should work... But you'll have to verify that on your end to make sure...
#15