CA FS: LED 06-13 is250/350 Ebay Headlights W/ HID Bulb
#3
Driver School Candidate
Thread Starter
Join Date: Nov 2012
Location: CA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
TBH the that bothered me most was the calibration/aiming/leveling of the light (as you can see in the picture). To accurately aim the lights, you would need a leveled driveway and 25-30 feet from a wall (VERY IMPORTANT). Also unlike other headlights, you would have to dismount the headlights to adjust the *****, not as convenient as oem where you can adjust while the headlights are mounted. Other than that I think the quality and function of these headlights are very good for the price I bought them for. I currently have HID conversion on halogen headlights which I am content with. Another thing, the oem DRL (high beams at 50%) are on the same time as the LED DRL so if you want to have it look exactly like LED OEM, you would have to disabled the high beam DRL. Other than that, installation was so easy I just end up taking it off. My "loss" your gain.
#4
Lead Lap
Join Date: Mar 2004
Location: Greenville + Orangeburg, South Carolina
Posts: 539
Likes: 0
Received 1 Like
on
1 Post
is it safe to say that I would have to adjust them before putting the bumper back on or have you adjusted them already? Any close up pics of the scratch? Also, is there a price diff with out bulbs? I want to do a diff bulb temp so would have to buy an HID kit as well of my liking
#5
Driver School Candidate
Thread Starter
Join Date: Nov 2012
Location: CA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I have not adjusted them. The easiest way to adjust them is right when you install them, connect the battery and see how your cut off is. The headlights mount without you having to screw in all the screws, once you have the alignment you are content with, then you screw in the 3 screws. All you need is an 8mm wrench. I will only sell it with the bulb since these headlights are H7 specific. I will post pic of scratch when available.
Trending Topics
#11
Driver School Candidate
Thread Starter
Join Date: Nov 2012
Location: CA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
@whitebeast
Thanks a lot. I would also like to announce @whitebeast has been a huge contributor to the aftermarket headlight topic. I got most of my how-to/diy answers from searching his posts.
Thanks a lot. I would also like to announce @whitebeast has been a huge contributor to the aftermarket headlight topic. I got most of my how-to/diy answers from searching his posts.
Thread
Thread Starter
Forum
Replies
Last Post
worldcat
NX - 1st Gen (2015-2021)
14
10-22-18 08:05 AM
shomci
IS - 2nd Gen (2006-2013)
1
12-24-16 11:01 PM