NM CHEAP** ISF ISS Track Exhaust **CHEAP
#1
CHEAP** ISF ISS Track Exhaust **CHEAP
Hello all and thanks for looking,
I'm finally getting around to selling this, unfortunately I'm going to have to limit it to local sale (Albuquerque, NM) or pick-up only unless the buyer has a hook-up and can arrange shipping.
This is one of the first version ISS track exhausts made by ISS, I got it from another member here and used it until I replaced it with the DES version. The difference is that this one does not have resonators so if your looking for an exhaust that would probably maximize HP/TQ output, this might be it since there is nothing hindering flow. On the downside, you will get some drone around 1800-2000 RPM as many a member has experienced from this and other type of exhausts. Once your out of that specific area though, it smooths out and sounds fantastic.
As you can see in the pics, I had the x-pipe welded on both sides to the exhaust and removed the clamps that originally came with it. Didn't like the "clamp" method as it would leak, anyway this center section is now one big piece that is about 7' x 2' which is why I don't want to deal with shipping.
I am willing to cut it down/apart if another member wants to purchase and pays in advance for me to do so, but won't until a deal is made. Then I would ship at the buyer's cost with no issue.
The tape and plastic bags are just there to protect and keep unwanted things out like critters and water so don't let that distract.
So, thanks for hanging in there so far. I'm selling for $375 as-is which includes paypal fees. If you interested and have some solutions just PM me and we can discuss, I am willing to do some work on my end to help if your really interested and pay in advance, thanks.
Don
I'm finally getting around to selling this, unfortunately I'm going to have to limit it to local sale (Albuquerque, NM) or pick-up only unless the buyer has a hook-up and can arrange shipping.
This is one of the first version ISS track exhausts made by ISS, I got it from another member here and used it until I replaced it with the DES version. The difference is that this one does not have resonators so if your looking for an exhaust that would probably maximize HP/TQ output, this might be it since there is nothing hindering flow. On the downside, you will get some drone around 1800-2000 RPM as many a member has experienced from this and other type of exhausts. Once your out of that specific area though, it smooths out and sounds fantastic.
As you can see in the pics, I had the x-pipe welded on both sides to the exhaust and removed the clamps that originally came with it. Didn't like the "clamp" method as it would leak, anyway this center section is now one big piece that is about 7' x 2' which is why I don't want to deal with shipping.
I am willing to cut it down/apart if another member wants to purchase and pays in advance for me to do so, but won't until a deal is made. Then I would ship at the buyer's cost with no issue.
The tape and plastic bags are just there to protect and keep unwanted things out like critters and water so don't let that distract.
So, thanks for hanging in there so far. I'm selling for $375 as-is which includes paypal fees. If you interested and have some solutions just PM me and we can discuss, I am willing to do some work on my end to help if your really interested and pay in advance, thanks.
Don
#3
that is so damn cheap...If you were willing to ship id take this off your hands right now.
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Meraki Autoworks
CL Vendor Products for IS-F
0
06-22-16 10:45 AM
daniel3ooo
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
11
08-17-14 06:10 PM
Salil022
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
8
02-16-12 08:06 PM