When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Alright, listen up. The supercharger intake bulletcars.com sells for the 1uz is pre 1998. They do sell a 2uz supercharger intake with universal top plate that would work on our cars but its 5 1/2 inches tall. that in addition to the m112 or mp90 supercharger puts it way higher than your factory hood can allow. the m112 is 5 1/2 inches tall or 5 3/8. based on my measurements, we have a total of 9 inches to work with. that's from the top of the cylinder heads to the bottom of the front portion of hood the intake touches. remember, I know this because I currently have a 2uz tundra intake on my 430 so I have real data to work with. Im still ordering the 2uz intake from them and gonna use a m112 bc their so plentiful and cheap enough. the intake with top plate is 1035 shipped. not bad for being able to just bolt on a supercharger. their top plate is not pre cut for a m112 though so it'll have to be.