Swift Racing Technologies (SRT) Intake on 98 SC300
Thread Starter
Driver School Candidate
Joined: Jan 2007
Posts: 49
Likes: 0
From: FL
Swift Racing Technologies (SRT) Intake on 98 SC300
Just wanted to post up a pic of my SC300 with the SRT Intake for a GS300. I searched alot about intake options for VVTi SC's and the possibility of installing a GS/IS 300 version on the car and here is the result:
Installing is pretty much the same as a GS300, ECU wires are different colors but the piggy back included in the package works fine. Heatshield of course was made for the GS300 and the shop that installed it (Mazworx here in Orlando) custom made as seen above.
Installing is pretty much the same as a GS300, ECU wires are different colors but the piggy back included in the package works fine. Heatshield of course was made for the GS300 and the shop that installed it (Mazworx here in Orlando) custom made as seen above.
Pole Position
Joined: Jun 2004
Posts: 254
Likes: 0
From: VA
I have this on my 00 SC4...it does fit albeit with some modifications to the power steering pump reservoir bracket and maybe a few other things - minor tube routing issues really. I also have a custom heat & noise shield.
Highly recommended
Highly recommended
Lexus Test Driver
Joined: Aug 2005
Posts: 1,354
Likes: 1
From: SoCal
i'm pretty familiar w/ the modifaction for the srt intake, it's just that i really dont wanna hack up my power steering resevoir. I'd like to put everything back to stock if i needed to. Thx for the input guys.
Trending Topics
Thread Starter
Driver School Candidate
Joined: Jan 2007
Posts: 49
Likes: 0
From: FL
iasc300, its a bit decieving from this angle but there is plenty of room and the custom heat shield keeps the intake from moving side to side.
tavarish, the post was merely documentation for anyone in the position I was in when they just wanted to get an intake for their VVTi SC300. I never found any products directly marketed to the 98+ years. I did attempt searches on this forum but there was no definitive answer.
tavarish, the post was merely documentation for anyone in the position I was in when they just wanted to get an intake for their VVTi SC300. I never found any products directly marketed to the 98+ years. I did attempt searches on this forum but there was no definitive answer.
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
Thread
Thread Starter
Forum
Replies
Last Post
