ClubLexus - Lexus Forum Discussion
0 2021/12/22 19:29:36
0 2021/12/24 14:31:45
0 2021/12/24 14:36:01
Not impressed with the packaging…
Not impressed with the packaging…
0 2022/01/03 19:55:34
I pulled the fender with a ratchet strap and gave it a few light taps with the sand mallet to realign the fender before taking it off. Hopefully this will move the mounting brackets back to normal. I will need to get a new fender for this side.
I pulled the fender with a ratchet strap and gave it a few light taps with the sand mallet to realign the fender before taking it off. Hopefully this will move the mounting brackets back to normal. I will need to get a new fender for this side.
0 2022/01/03 19:55:42
Radiator support is in and everything lines up fairly close. A little tight on passenger side where majority of the impact was but it went together just fine. I don’t have a welder so I used sheet metal screws to conned the passenger side of the road support. I’m sure it’s not the right way to do it but hey it’s a commuter.
Radiator support is in and everything lines up fairly close. A little tight on passenger side where majority of the impact was but it went together just fine. I don’t have a welder so I used sheet metal screws to conned the passenger side of the road support. I’m sure it’s not the right way to do it but hey it’s a commuter.
0 2022/01/03 19:55:48
0 2022/01/17 12:48:15
0 2022/01/17 12:48:23
0 2022/01/17 12:48:30
0 2022/01/17 12:58:07
0 2022/01/17 12:58:19
0 2022/01/17 12:59:34
Before tap
Before tap
0 2022/01/17 13:08:46
After tap
After tap
0 2022/01/17 13:09:00
Broken thermostat housing
Broken thermostat housing
0 2022/01/17 13:09:13
Done
Done
0 2022/01/17 13:09:28
I bought another one 😄 2011 is350 awd
I bought another one 😄 2011 is350 awd
0 2022/01/17 13:09:48
0 2022/02/13 17:37:35
0 2022/02/21 23:29:19
0 2022/02/26 17:19:30
0 2022/02/26 17:19:37
Driver side bracket comparing damaged to new
Driver side bracket comparing damaged to new
0 2022/02/26 17:34:58
Passenger side damaged
Passenger side damaged
0 2022/02/26 17:35:06
Passenger side, won’t close all the way. Really glad I pulled these out and checked them.
Passenger side, won’t close all the way. Really glad I pulled these out and checked them.
0 2022/02/26 17:35:14
0 2022/03/29 00:34:21
With a small screwdriver I pulled loose two wires. Green wire 100% brightness red wire ground. I did not both with the 3rd wire which was the 50% brightness. This way requires a relay from what I’ve red and i don’t mind having them on full brightness
With a small screwdriver I pulled loose two wires. Green wire 100% brightness red wire ground. I did not both with the 3rd wire which was the 50% brightness. This way requires a relay from what I’ve red and i don’t mind having them on full brightness
0 2022/03/29 00:34:30
Tested led light to ensure I had proper wires.
Tested led light to ensure I had proper wires.
0 2022/03/29 00:34:36
Removed white guard.
Removed white guard.
0 2022/03/29 00:34:44
9v powering lights.
9v powering lights.
0 2022/03/29 00:34:52
0 2022/03/29 00:35:00
I took the car out for a drive and it smelt like mouse urine with the vents on… after further inspection I found that a mouse nest was made on top of the cabin filter that had been eaten through. I am actually very surprised how much progress the mouse made in the 2-3 months this car was in my shop. Took a shop vac to the mess and replaced the cabin filter, done deal.
I took the car out for a drive and it smelt like mouse urine with the vents on… after further inspection I found that a mouse nest was made on top of the cabin filter that had been eaten through. I am actually very surprised how much progress the mouse made in the 2-3 months this car was in my shop. Took a shop vac to the mess and replaced the cabin filter, done deal.
0 2022/03/29 00:35:07
0 2022/03/29 00:41:07
0 2022/03/29 00:41:19
Wiring of leds finished, new hood installed.
Wiring of leds finished, new hood installed.
0 2022/03/29 00:41:27
Install a mini fuse kit, disregard the 3 amp fuse, I replaced with 2 10s.
Install a mini fuse kit, disregard the 3 amp fuse, I replaced with 2 10s.
0 2022/03/29 00:41:33
0 2022/03/29 00:41:41
I used a file to cut a slot in the cover allowing the wire to pass through.
I used a file to cut a slot in the cover allowing the wire to pass through.
0 2022/03/29 00:41:47
Taped, peeped with 600 grit for hood and a plastic adhesion coat on bumper with flex agent to avoid cracking.
Taped, peeped with 600 grit for hood and a plastic adhesion coat on bumper with flex agent to avoid cracking.
0 2022/04/24 16:44:12
0 2022/04/24 16:44:19
0 2022/04/24 16:44:25