clifftrail

iTrader: (9)

This is a complete set of factory BBS rims w/tires from a 08 Lexus ISF. It includes all you see, the tires are mounted, balanced and have working tire pressure sensors installed. The tires have approximately 10K miles on them and have lots of life left. You'll see in the pics that they aren't even close to the OEM wear bars in the grooves.

I'd rate three of the rims as a 10 of 10 condition and one of the rear rims has some curb rash that was touched up so I'd give that an 8 of 10.

These are directional tires and a staggered setup. The tires are Bridgestone Potenza RE050A and the fronts are 225/40/19 and rears are 255/35/19.

The rims are a 114.3 bolt pattern with fronts being 19x8 with a 45 offset. The rears are 19x9 with a 55 offset.

Price is $1600 shipped to include all fees for the CONUS 48 states (no Hawaii or Alaska). Shipping internationally will cost more so if your interested be prepared for a higher price to cover fees.

Thanks for looking.

clifftrail

iTrader: (9)

Tires ... tire pressure sensors do work, I had this set programmed for the car to recognize when installed and you'll be able to do the same.

Jamsheddy

iTrader: (4)

Will these fit a GS without any issues. Meaning I won't need hub centric rings or anything?

clifftrail

iTrader: (9)

No idea, ping the GS guys. I'm sure they have tried similar wheels and may know. Unless you want to drive here, test fit and drive back with them on.

Roe

iTrader: (10)

If you have a 06 GS, no problem with these fitting. With a 07 to 11, you need at least a 10 mm spacer up front to clear the larger brake calipers.

2nd Gen GS, I have no idea.

CalitriSC

iTrader: (13)

You don't need hub centric rings for and factory Lexus wheel

Jamsheddy

iTrader: (4)

Good to know, thanks guys!

clifftrail

iTrader: (9)

Wheels/tires sold! Thanks CL!!!