CA FS / FT : SSR vienna kreis stepped lipped 19x9.5 / 11
03-19-13, 11:19 PM
#1
FS / FT : SSR vienna kreis stepped lipped 19x9.5 / 11
SSR Vienna Kreis
19x9.5 19x11
offset is unknown.
tires are new 90% all around
stepped lip
fitment is on sc300 with mildly rolled fenders,
asking 2250 or trade for some ccw classics
not in a rush to sell so please don't waste mine or your time.
714 548-73eightzero
19x9.5 19x11
offset is unknown.
tires are new 90% all around
stepped lip
fitment is on sc300 with mildly rolled fenders,
asking 2250 or trade for some ccw classics
not in a rush to sell so please don't waste mine or your time.
714 548-73eightzero
04-10-13, 09:05 AM
#6
Driver
iTrader: (1)
Join Date: Jun 2010
Location: Ca
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Easy way to measure offset....
Take overall width (natural width +1")
So in your case
9.5 = 10.5 OW
11 = 12 OW
Measure backspacing (measurement from mounting surface of wheel to the very back of the barrel, use a straight edge and a tape measure) For example say that you go 5.5" backspacing.
Divide overall width by two. (12/2=6)
Take that number and subtract if from the back spacing measurement.
5.5 - 6 = .5
Take that number and convert to MM (multiple by 25.4)
.5 x 25.4 = 12.7mm
And you're done.
Take overall width (natural width +1")
So in your case
9.5 = 10.5 OW
11 = 12 OW
Measure backspacing (measurement from mounting surface of wheel to the very back of the barrel, use a straight edge and a tape measure) For example say that you go 5.5" backspacing.
Divide overall width by two. (12/2=6)
Take that number and subtract if from the back spacing measurement.
5.5 - 6 = .5
Take that number and convert to MM (multiple by 25.4)
.5 x 25.4 = 12.7mm
And you're done.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
boostedGS
Wheels and Tires Classifieds
58
05-28-09 02:02 AM
Nitekids
Wheels and Tires Classifieds
7
04-30-05 05:11 PM
