CA FS: Work Meister S1 3PC 19x9.5 +24 19x10.5 +23 (WHITE)
#1
Lexus Test Driver
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: CA
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
FS: Work Meister S1 3PC 19x9.5 +24 19x10.5 +23 (WHITE)
Hi, I have for sale a set of wheel recently bought from guacamole ( also previously owned by dangy). Condition and other information are listed below. Please do not lowball me as you should know how much a set of these run for. I can be reach through either PM/Txt/Call 510-Eight2One-Zero33Seven (Kevin). Thanks
**AS OF 5/26/12 THE WHEELS ARE OFF THE CAR AND READY FOR A NEW HOME**
**Local have priority**
**Please add for shipping and paypal fee (We'll split the fee 1.5% each as I know its an a$$)**
Works Meister S1 3PC
White face with polished lip
Specs:
19x9.5 +24 Front
19x10.5 +23 Rear
*Had the valve stem part custom to fit Lexus TPMS sensors*
Hard to measure lip size due to step-lip so here's approximately what I got:
3.5" Front
4.5-5" Rear
Tires:
Falken 452 (225/35) Front - <1000miles
Falken 452 (255/35) Rear - <1000miles
Flaws:
Clearcoat on some of the wheels are coming off due to natural aging as these are the original lips. You could have it strip and run it raw or strip then reclearcoat or leave as is. Not noticeable until you go close up.
*No crack/lip bent/rash/curb*
Fender Modification (This is for people who have questions running these on their ISX50):
1. Rolled all four corners
2. Either push fender liners up/cut them/or leave as is if you don't mind it rubbing even on small dips
3. I actually did not have to mess with my bumper tab for this setup
4. I am lowered (1inch from the lip to the fender of the car)
5. Alignments are within spec so do not worry of it eating up your tires
**This setup will give you a very aggressive and flush fitment, see pics below**
Price:
$3600 with tires
$3200 without tires
$500 for just tires
Pictures:
CHECK MY PART OUT LISTING!!!
https://www.clublexus.com/forums/is2...-out-sale.html
**AS OF 5/26/12 THE WHEELS ARE OFF THE CAR AND READY FOR A NEW HOME**
**Local have priority**
**Please add for shipping and paypal fee (We'll split the fee 1.5% each as I know its an a$$)**
Works Meister S1 3PC
White face with polished lip
Specs:
19x9.5 +24 Front
19x10.5 +23 Rear
*Had the valve stem part custom to fit Lexus TPMS sensors*
Hard to measure lip size due to step-lip so here's approximately what I got:
3.5" Front
4.5-5" Rear
Tires:
Falken 452 (225/35) Front - <1000miles
Falken 452 (255/35) Rear - <1000miles
Flaws:
Clearcoat on some of the wheels are coming off due to natural aging as these are the original lips. You could have it strip and run it raw or strip then reclearcoat or leave as is. Not noticeable until you go close up.
*No crack/lip bent/rash/curb*
Fender Modification (This is for people who have questions running these on their ISX50):
1. Rolled all four corners
2. Either push fender liners up/cut them/or leave as is if you don't mind it rubbing even on small dips
3. I actually did not have to mess with my bumper tab for this setup
4. I am lowered (1inch from the lip to the fender of the car)
5. Alignments are within spec so do not worry of it eating up your tires
**This setup will give you a very aggressive and flush fitment, see pics below**
Price:
$3600 with tires
$3200 without tires
$500 for just tires
Pictures:
CHECK MY PART OUT LISTING!!!
https://www.clublexus.com/forums/is2...-out-sale.html
Last edited by Kevin.IS; 05-26-12 at 12:01 AM.
Trending Topics
#13
Lexus Test Driver
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: CA
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys, but please pm me if you have any question.
kams229- Approximately 3.5" front and 4.5-5" rear.
giolex300- What obby said. A little google will answer your question easily: http://www.aa1car.com/library/tire_monitors.htm
kams229- Approximately 3.5" front and 4.5-5" rear.
giolex300- What obby said. A little google will answer your question easily: http://www.aa1car.com/library/tire_monitors.htm