PA FS NEW Ichiba 15mm and 25mm spacers
12-17-11, 04:18 PM
#1
Rookie
Thread Starter
Join Date: Dec 2009
Location: PA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
FS NEW Ichiba 15mm and 25mm spacers
For sale I have a brand new Ichiba V1 15mm spacers and Ichiba V2 25mm spacers. Spacers are hub centric 5x114.3, 60mm bore 12 x 1.5. 15mm spacers are still in packaging. 25mm spacers are as well, but were test fitted. All I did was put them on the rear and lower the car. It wasn't what I wanted so I went with a bigger spacer. The 25mm that was test fitted was NEVER driven on. Just tq'd to 75 ft lbs dropped then raised and taken off. Absolutely nothing wrong with it. If I didn't tell you this you would swear they were never test fitted at all.
Difference between V1 and V2 spacers is the V1's require you to tap out your old studs and install the new extended studs which are included. Not that hard. Can tap them out and feed the new one through. Then just use the supplied nut or a open ended lug and tq it down. This will seat the stud in just fine. If you don't feel comfortable doing this then it usually cost $25 to press new ones in.
I am located in Newmanstown, PA 17073. I am looking for $200 picked up or $200 shipped CONUS. If paying via Paypal I am verified and I ask that you send it as a gift or send a extra 3.4% to cover fee's.
I ship daily 2-3 day mail from my Military base since we have FEDEX and USPS right next to my building.
If you have any questions feel free to ask.
Thank you
Judd Skipper
15MM v1
25MM v2. not sure why I didn't have the last nut on in the picture, but it does come with all 10
Difference between V1 and V2 spacers is the V1's require you to tap out your old studs and install the new extended studs which are included. Not that hard. Can tap them out and feed the new one through. Then just use the supplied nut or a open ended lug and tq it down. This will seat the stud in just fine. If you don't feel comfortable doing this then it usually cost $25 to press new ones in.
I am located in Newmanstown, PA 17073. I am looking for $200 picked up or $200 shipped CONUS. If paying via Paypal I am verified and I ask that you send it as a gift or send a extra 3.4% to cover fee's.
I ship daily 2-3 day mail from my Military base since we have FEDEX and USPS right next to my building.
If you have any questions feel free to ask.
Thank you
Judd Skipper
15MM v1
25MM v2. not sure why I didn't have the last nut on in the picture, but it does come with all 10
Thread
Thread Starter
Forum
Replies
Last Post
xrsracer
Wheels and Tires Classifieds
1
03-01-12 07:27 PM
tungo
Wheels and Tires Classifieds
4
08-06-09 11:19 PM
