CA FS: Brand NEW 18" 57S PRO by Gram Lights. VERY SEXY (would ship)...........VOUCHED!!!
09-01-10, 09:59 PM
#1
Driver School Candidate
Thread Starter
Join Date: May 2010
Location: CA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
FS: Brand NEW 18" 57S PRO by Gram Lights. VERY SEXY (would ship)...........VOUCHED!!!
04/11/2011 OPEN TO REASONABLE OFFERS
For sale is a set of Brand New in Box, unmounted 57s PRO by Gram Lights (Rays Engineering).
Specs
Front: 18x9 +37 26.4lbs 1/2" Lip 5x114.3
Rear: 18x10 +40 27.2lbs 1 1/2" Lip 5x114.3
Construction type: Two piece wheel with a cast flow formed face powdercoated light grey and a stainless steel jacket. Everything you would expect from one of the best manufacturers in the world. This includes, quaity finish, rolled lips, superb durability and of course attractive looks.
This set was custom ordered with a custom front offset and a custom finish straight from the factory. These wheels normally have a brushed center bolt area that gives them a smaller, cheaper appreanace (refer to pics below). However, this set has the entire face powdercated. Importantly, I believe gunmetal and black have not been an option for a while, therefore, this set is very rare.
This was easily a $3,000 setup after all the extras. These wheels are currently made to order with a 3-4 months wait from Japan.
Asking price is $2700 including shipping and paypal fees.
Asking price for local pick up in Los Angeles, CA is $2500 through paypal or $2425 cash.
Set includes authentic rays valve stems (no caps), rays product warranty book and owners manual along with black rays covers. Center caps are always optional and can be had for about $70-$80 depending on style.
For refrence of custom finish (hence, the polished area on the center, where as this set is fully powedercoated)
Front concavity:
Rear Concavity:
High resolution individual photos:
For sale is a set of Brand New in Box, unmounted 57s PRO by Gram Lights (Rays Engineering).
Specs
Front: 18x9 +37 26.4lbs 1/2" Lip 5x114.3
Rear: 18x10 +40 27.2lbs 1 1/2" Lip 5x114.3
Construction type: Two piece wheel with a cast flow formed face powdercoated light grey and a stainless steel jacket. Everything you would expect from one of the best manufacturers in the world. This includes, quaity finish, rolled lips, superb durability and of course attractive looks.
This set was custom ordered with a custom front offset and a custom finish straight from the factory. These wheels normally have a brushed center bolt area that gives them a smaller, cheaper appreanace (refer to pics below). However, this set has the entire face powdercated. Importantly, I believe gunmetal and black have not been an option for a while, therefore, this set is very rare.
This was easily a $3,000 setup after all the extras. These wheels are currently made to order with a 3-4 months wait from Japan.
Asking price is $2700 including shipping and paypal fees.
Asking price for local pick up in Los Angeles, CA is $2500 through paypal or $2425 cash.
Set includes authentic rays valve stems (no caps), rays product warranty book and owners manual along with black rays covers. Center caps are always optional and can be had for about $70-$80 depending on style.
For refrence of custom finish (hence, the polished area on the center, where as this set is fully powedercoated)
Front concavity:
Rear Concavity:
High resolution individual photos:
Last edited by VIPMaxima; 04-11-11 at 10:54 AM.
09-02-10, 03:32 PM
#3
Master Thread Closer!!
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
Vouch received....
Originally Posted by tavarish
Hello,
I vouch for Mike (VIPMaxima). I've dealt with him on many occasions on other sites, like maxima.org and nycmaximas.org. He has a 100% positive itrader feedback rating and is a stand-up guy.
If you have any questions, please PM me.
Thanks,
-Freddy
I vouch for Mike (VIPMaxima). I've dealt with him on many occasions on other sites, like maxima.org and nycmaximas.org. He has a 100% positive itrader feedback rating and is a stand-up guy.
If you have any questions, please PM me.
Thanks,
-Freddy
09-02-10, 03:58 PM
#4
Driver School Candidate
Thread Starter
Join Date: May 2010
Location: CA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Tavarish and PHML
My feedback thread with many users vouching for me on NYCMaximas.org (requires registration): http://nycmaximas.org/showthread.php?t=54422
The same wheels posted on NYCMaximas.org under "VIP Maxima" to prove that the username belongs to me: http://nycmaximas.org/showthread.php?t=55518
Lets get these wheels sold !
My feedback thread with many users vouching for me on NYCMaximas.org (requires registration): http://nycmaximas.org/showthread.php?t=54422
The same wheels posted on NYCMaximas.org under "VIP Maxima" to prove that the username belongs to me: http://nycmaximas.org/showthread.php?t=55518
Lets get these wheels sold !
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
timmy0tool
Wheels and Tires Classifieds
0
02-27-12 05:48 PM
deckdout2
Wheels and Tires Classifieds
21
07-11-11 07:01 PM
gottahaveit2
Wheels and Tires Classifieds
1
05-10-09 07:32 PM
griffon
Wheels and Tires Classifieds
10
02-23-09 10:16 PM
