Opinion on MHT Chrome Wheels
#1
Rookie
Thread Starter
Join Date: Jun 2002
Location: New Jersey
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Opinion on MHT Chrome Wheels
On ebay, I purchased a used set of Chrome MHT Monterey wheels. There were from a LS400 with Lexus logos. I thought the wheels were 17x8, but they are 16x7. From 10 feet away these wheels look great, but I am now having second thoughts on whether I want to put these wheels on my Green 1997 SC300 five speed. Before I buy tires for these wheels I like your opinon of these wheels on a SC300. Thanks in advance
P.S. I hope the link works!!!!
P.S. I hope the link works!!!!
#3
Lexus Champion
Join Date: May 2002
Location: California
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
lunasea,
MHT is a decent grade of wheel for a mass produced brand. They are mid-high quality and the chrome doesn't tend to chip or come off like cheap wheels.
However, your stocks are probably the same size and therefore spending cash on wheels without going to 17 or larger, probably isn't worth it.
MW
MHT is a decent grade of wheel for a mass produced brand. They are mid-high quality and the chrome doesn't tend to chip or come off like cheap wheels.
However, your stocks are probably the same size and therefore spending cash on wheels without going to 17 or larger, probably isn't worth it.
MW
#5
Lexus Test Driver
When I had an eclipse... I thought they had Niche Pultecs. Even had Niche caps. When I took them off to put 18" Altstadts on... I was like OH WTH! I see MHT on the inside..... LoL
#6
Rookie
Thread Starter
Join Date: Jun 2002
Location: New Jersey
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
#7
Lexus Champion
Join Date: Feb 2002
Location: Texas
Posts: 2,490
Likes: 0
Received 0 Likes
on
0 Posts
Re: MHT Monterey Picture
Originally posted by lunasea
http://www.truckstuff.org/wheels/mht/monterey.htm
I hope the link works!!!!
http://www.truckstuff.org/wheels/mht/monterey.htm
I hope the link works!!!!
Trending Topics
#8
Rookie
Thread Starter
Join Date: Jun 2002
Location: New Jersey
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
LS400 Wheels from dealer
My understanding that these wheels come off of a LS 400 which were dealer installed. The wheels have 12/94 on the inside of the wheels.
#9
I believe they are associated/owned by the same company as niche/neeper. Which are pretty good wheels imo. The designs of their wheels are usually original, too original for my tastes actually. If it were me I would probably sell them and get a set of bigger wheels.
#10
Driver School Candidate
Join Date: Oct 2002
Location: CA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I have pulled MHT wheels out of the box and sent them right back. One time they sent me 3 sets of wheels and I spent an entire morning inspecting for excessive runout of the wheel and poor chrome finish. Needless to say, I did find 4 good wheels out of the 12. If you want to avoid chrome peeling in the future, get rid of the wheels and spend a little bit more money on higher quality wheels. If you look closely on the wheel you will find "Made in China" stamped somewhere.
Good luck.
LexusDS
Good luck.
LexusDS
#12
MHT's are cost a little bit expecially in larger sizes. They are not a knock-off they are the parent company of Neeper. They have some sweet designs but a little to close in price to Lowenharts (for 20in.)
Thread
Thread Starter
Forum
Replies
Last Post