Neo

iTrader: (3)

Hi guys,

I'd like to find out what is on the back of the Zauber Gettins wheels. What is "written" on the spokes or anywhere else that may have to do with build and specification. For those that owns or have previously owned these wheels, any help would be appreciated. If some of you have a set that is dismounted, that is even better since you will not be going from memory.

GS3Tek

iTrader: (8)

Should've saw this thread yesterday when I had the wheels off to lower my CS
I'll check it for you as soon as I can-unless someone has them off already

Neo

iTrader: (3)

Thanks. Any help would be great.

GS3Tek

iTrader: (8)

I haven't had the chance to take the wheels off, but I poked through and saw the offset sticker(worn) and another chromish sticker that's all in Japanese. The only English I saw was Arrow Company

I'll try to take the wheels off tomorrow to see if there's anything from the inside. I do remember that there's nothing else written or stamped.

Are you trying to send out the wheels to have them repaired?

bluelex

Hey Chris I was thinking of you today as I was at my brothers house mounting his Gettins. I don't have pics of the inside but I did take notes on what was inscribed on the back of the wheel spokes..

One spoke has inscribed 20r type SO OCD 14
another spoke has 03/4 & t9/15
another spoke has 690KG
another spoke has BY 337
and the lasy spoke just had inscribed Made In Japan


I was reading this off one of the rear wheels , Hope this helps..

Neo

iTrader: (3)

Thanks Adrian. What were the offset and disc specs to your wheels again? I want to see if the offsets, disc, and widths correlate to some of these numbers. Were these numbers on the rear or front wheels?

bluelex

Mine were 20x8.5 +44 normal disc and the rears were 20x10 +48 super low disc, these specs I gave you were from one of the rear wheels...

GS3Tek

iTrader: (8)

Well, I had the wheels off today so I took these shots:








Last one said Made in Japan as bluelex said.