2nd gen offset 19x8.5 32 & 19x10 29 with spacers
10-20-07, 06:19 PM
#1
Pole Position
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: NC
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
2nd gen offset 19x8.5 32 & 19x10 29 with spacers
Just wondering if that would work. I currently have 37 offsets in the front and 44 in the rear. I figured a 5mm spacer in the front and 15mm spacer in the back will give me the look I want. I'm sure I'll need to cut out some, if not most of the fender lip in the rear, but I just want to make sure these spacers won't push my wheel out too far.
I just want them as flush as possible without sticking out.
What do you guys think?
I just want them as flush as possible without sticking out.
What do you guys think?
10-23-07, 06:24 PM
#2
Lead Lap
I had a set of work euroline with 15mm in the front and 25mm in the rear. It was like a +26 in the front and +16 in the rear. I had rolled rears and a safe but nice tire combo. 225 up front and 245 in the rear. No problems when on the highway. Tein ss coilovers did nice for the drop.
Last edited by BRADSGS4; 10-23-07 at 06:27 PM.
10-26-07, 08:22 AM
#5
slo, notice that brad said rolled fenders, not just a shaved lining, and some very stretched tires, and then the type of tire changes it up a bit too.
when you pull it off, do post pictures...those types of setups always do other members a service when pics are added
when you pull it off, do post pictures...those types of setups always do other members a service when pics are added
Thread
Thread Starter
Forum
Replies
Last Post
