Will BC--R-02BR coilovers fit 2006 GS430 ?
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2016
Location: Ontario
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Will BC--R-02BR coilovers fit 2006 GS430 ?
Hello everyone after much research I was unable to find an answer of wether or not the BC-R Racing coilover BC-R-02 BR which is listed as fitment for 2006-2013 is250 would fit a 2006 GS 430? I think I need BC-R21 BR as mentioned by another post but not exactly sure. In that post the retailer said R-02 but manufacturer said R-21. Pretty sure they installed R-02 and fit well on the rear but too low on the front. The post was never followed up on and I couldn't find any other information. Any thoughts or experiences would be appreciated... thanks in advance.
#2
That GS430 is a a 3rd gen. You need R-02
With a slightly stiffer spring rate IMO
With a slightly stiffer spring rate IMO
__________________
Email:sales@jmautoracing.com
AIM: jmautoracing@gmail.com
www.jmautosports.com
1-855-998-8726
Email:sales@jmautoracing.com
AIM: jmautoracing@gmail.com
www.jmautosports.com
1-855-998-8726
#3
Driver School Candidate
Thread Starter
Join Date: Mar 2016
Location: Ontario
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for your time and the response. Okay the BCR-02 BR will fit but will they be too low on the front and rub the inner wheel wells? Has anyone installed this series of coilovers in a 2006 GS430 ? What was the result? What stiffness of spring to be used? Much appreciate any thoughts or experiences.
#4
They will not be too low. I would recommend a 14/10 setup with that car.
__________________
Email:sales@jmautoracing.com
AIM: jmautoracing@gmail.com
www.jmautosports.com
1-855-998-8726
Email:sales@jmautoracing.com
AIM: jmautoracing@gmail.com
www.jmautosports.com
1-855-998-8726
Thread
Thread Starter
Forum
Replies
Last Post
LSUGS430
Suspension and Brakes
13
10-23-13 07:41 PM