Suspension and Brakes Springs, shocks, coilovers, sways, braces, brakes, etc.

Lower control arm help!!

Thread Tools
 
Search this Thread
 
Old 09-09-18, 01:30 PM
  #1  
Jason12327
Driver School Candidate
Thread Starter
 
Jason12327's Avatar
 
Join Date: Aug 2017
Location: Washington
Posts: 9
Received 0 Likes on 0 Posts
Default Lower control arm help!!

So I got an alignment recently at Firestone and they said my lower control arms have a lot of play in them so does that mean that I need to replace my whole lower control arm or just the bushing.
Old 09-09-18, 03:19 PM
  #2  
LEXXIUM
Pole Position
iTrader: (1)
 
LEXXIUM's Avatar
 
Join Date: Aug 2008
Location: IN
Posts: 2,075
Received 40 Likes on 36 Posts
Default

You can replace lower control arm bushings only if your lower ball joints on your control arms are good, if they're not I'd replace the whole control arms, that's what I did.
Old 09-09-18, 03:26 PM
  #3  
Jason12327
Driver School Candidate
Thread Starter
 
Jason12327's Avatar
 
Join Date: Aug 2017
Location: Washington
Posts: 9
Received 0 Likes on 0 Posts
Default

Where did you get your lower control arms
Old 09-10-18, 04:46 PM
  #4  
LEXXIUM
Pole Position
iTrader: (1)
 
LEXXIUM's Avatar
 
Join Date: Aug 2008
Location: IN
Posts: 2,075
Received 40 Likes on 36 Posts
Default

Originally Posted by Jason12327
Where did you get your lower control arms
I pulled them off a lower mileage sc300 in the junk yard, then I replaced the bushings with prothane, because they were bad, but the ballpoints were perfect, total cost for both was 60$ and prothanes were 56$ 8 years ago.
The following users liked this post:
Jason12327 (09-10-18)
Old 09-10-18, 08:33 PM
  #5  
- V -
Instructor
iTrader: (1)
 
- V -'s Avatar
 
Join Date: Oct 2011
Location: FL
Posts: 847
Received 161 Likes on 121 Posts
Default

there is enough info about lower control arms on this forum to fill an encyclopedia. It would take me about an hour to regurgitate all this info in this post so to make things move a bit faster ill give you the options and if you'd like to know all the research behind them you can run a few searches on the forums or on google.

1. There is an aftermarket manufacturer that makes LCA's for our cars which cost about $180 each. There is an ebay vendor that sells them by the name of Toyolex Parts Connections. Ive had these on my car for about a year without an issue and the construction seems solid, alignment worked out fine and fitment was spot on.
2. the LCA on our cars are compatible with the late model supra lca's. brand new those cost about $270 each. More expensive but if you'd like to have the toyota brand behind the product thats the way to do it.
3. you can do what LEXXIUM suggested and either replace the bushings in your arms as long as your balljoints are good or you can find a set of arms in a junkyard that have good balljoints and replace the bushings on those
4. you can buy them from lexus directly, probably the least reasonable thing to do because they cost about $600 each

Remember that you'll need an alignment after you have those replaced and you'll also most likely need the sway bar links because if the lca's are going bad the link are probably on their way out too. If you go online you can find a pair of moog links for about $30 on amazon. Worth replacing to avoid more headaches later down the line.

Best of luck!

Last edited by - V -; 09-10-18 at 08:37 PM.
The following 2 users liked this post by - V -:
Jason12327 (09-10-18), wsaharem (03-17-19)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cbgdjg
SC430 - 2nd Gen (2001-2010)
43
01-26-17 04:33 PM
AnimalB
Suspension and Brakes
2
08-08-12 06:56 AM
questnyc
GS - 2nd Gen (1998-2005)
2
05-31-09 09:08 PM
OutlawTita
Suspension and Brakes
8
05-22-08 01:07 PM
tarq3
SC- 1st Gen (1992-2000)
6
11-05-02 11:06 AM



Quick Reply: Lower control arm help!!



All times are GMT -7. The time now is 11:38 PM.