Need help diagnosing front end noise/issue!!
03-23-18, 01:42 PM
#18
Originally Posted by Tony55330
JUSt ordered the part, think I’m gonna just replace it myself and than bring in for alignment !!
03-23-18, 02:07 PM
#19
Driver School Candidate
Thread Starter
Join Date: Mar 2018
Location: MN
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
IT says you need to remove the rack and pinion to get that camber bolt out? The how to in a repair guide I looked in today also said you need to remove the rack ? I’m more than willing to do it myself that was the only part I was worried about !
03-23-18, 02:37 PM
#20
Originally Posted by Tony55330
IT says you need to remove the rack and pinion to get that camber bolt out? The how to in a repair guide I looked in today also said you need to remove the rack ? I’m more than willing to do it myself that was the only part I was worried about !
03-23-18, 03:55 PM
#22
So I just checked the manual and it doesn't even mention the steering rack 
it is excactly like I explained it lol. Crap like what that shop told you is the reason why I decided to teach myself how to do this kind of work. You can do almost anything with the help from this forum and advice from other forum members. A few people on here (you know who you are) have helped me tremendously. A couple years ago I would've laughed about the thought of doing some of this work on my own, now I have a 2jzgte sitting on an engine stand all torn down that I pulled out of one SC to put in another SC. Just take your time, take some pictures and label everything and things should go smoothly 
Good luck
it is excactly like I explained it lol. Crap like what that shop told you is the reason why I decided to teach myself how to do this kind of work. You can do almost anything with the help from this forum and advice from other forum members. A few people on here (you know who you are) have helped me tremendously. A couple years ago I would've laughed about the thought of doing some of this work on my own, now I have a 2jzgte sitting on an engine stand all torn down that I pulled out of one SC to put in another SC. Just take your time, take some pictures and label everything and things should go smoothly Good luck
03-23-18, 04:00 PM
#23
Driver School Candidate
Thread Starter
Join Date: Mar 2018
Location: MN
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Awesome appreciate it! Yea I’ve learned a lot from this forum!! I do the majority of my repairs myself, the whole rack thing is what made me nervous lol I’ve done all the other front end suspension myself just haven’t had to do the lower control arm yet and haven’t looked underneath myself to see if the bolt would hit the rack ! So thanks again I’ll be getting this completed ASAP!
Thread
Thread Starter
Forum
Replies
Last Post
Agent$mith
Suspension and Brakes
13
05-26-15 07:42 PM
