1999sc300

Hey guys,

Does anyone have the part number or a source to get the Rear Upper Control Arm bolts/nuts for an SC? I searched but couldn't find it anywhere. Here's a picture for reference.




Wondering because I'm currently going through my '99 SC300 and doing control arm bushings because some of mine are shot. Getting the rear upper control arm out was a challenge because some of the bolts were a tad rusty, and that weird design Toyota made for the nut to get it to bottom out against the subframe and stop from spinning completely failed on one of mine and is in several pieces. I would like to get new ones to replace them to make my life easier when putting it all back together.

Thanks!
-Alex

Luxor

iTrader: (15)

Hello,

Here are the part numbers:

Bolt: 90119-14040
Washer: 90201-14031
Large oblong washer: 48757-24010
Nut: 90179-14054
End ring: 90523-16001

Your local dealership will have these parts or you can go online ssl-parts.com

1999sc300

Thank you so much!