xxwhosnxt

im bagging my 14 is350 rwd

I'm looking to purchase some work wheels

they specs they are giving me are
19x9 and 19x10

would that be good ?


thanks guys

jkhang714

They are giving u the safe specs. Im bagged and running 19x9.5 fronts and 19x11 rears and it fits no prob. This is a good set up if u like the stance look. Wheels are for sale too, if ur interested Txt me. 714-878-9008.

specONE

iTrader: (3)

Width of wheels is not enough to go by.
Need to take into consideration of wheel offset and tire size

gusgus91

This may be a noob question but is Airrex still the only kit available for our cars?

juvi22003

iTrader: (2)

Haven't been following the 3IS much since my car is no longer modded but off the top of my head i know Airrex and air force.

The common trend i have notice is air force struts and accuair management, i personally had airrex

Silec

iTrader: (10)

in addition to what juvi mentioned , d2 as well as UAS (bags and brackets that you can put onto coils like BC) make kits for the 3is.

To the OP what are the offsets? offsets are what going to determine if they will fit/tuck or not.

asiandavid

I just started looking into the air suspension and was wondering what is needed to work and what manufactor sells the whole kit or is it better to put air on a coilover system? Im still learning so bare with me lol

specONE

iTrader: (3)

I recommend reading, reading and keep reading on the subject matter until you feel confident about how it works before jumping in, even if you are not going to be installing it yourself.

https://www.airliftperformance.com/support/faqs/
https://bagriders.com/modlab/pages/AIR-RIDE-FAQ.html
http://www.ridetech.com/info/faq/
https://accuair.com/intro

asiandavid

thank you this is what i need

sgvlex

iTrader: (2)

any way to get around the sway links removal once you install the bags?

specONE

iTrader: (3)

Huh, why ,what you mean?
You don't need to remove sway bar endlinks to install the bags.
You don't need to leave endlinks off with bags installed

sgvlex

iTrader: (2)

two installers told me i had to remove sway bar links for bags,... now im confused

specONE

iTrader: (3)

Removing endlinks means you have no rear sway bar. Very dangerous to drive as it will drastically effect handling.


Take a look at my build thread. My endlinks were rubbing my Airrex bags very faintly. I did a very easy/free mod and gave myself that extra couple of mm clearance back that is needed.
https://www.clublexus.com/forums/bui...ml#post9359907

sgvlex

iTrader: (2)

Thanks so much! I wonder if I could use this with my big uas bags ?

Silec

iTrader: (10)

Nope it will still rub