Rear LCA bushings
#1
Lead Lap
Thread Starter
Join Date: Aug 2012
Location: NC
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Rear LCA bushings
Has anyone replaced the rear lca bushings on a sc400? Could not find anything in the DIY section. Is it possible to replace the bushings while the lca is on the car?
#2
Driver School Candidate
Join Date: Dec 2013
Location: md
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I did all the bushings except the rear uppers on my car. You will probably need to cut the bolts off and get new adjusters. After that the arm has to be removed so you can press the old bushings out. There is one in the knuckle but if you are good with a hammer and chisel you can do it on the car.
Thread
Thread Starter
Forum
Replies
Last Post