Corvette Z06 calipers and IS-F Rotors
06-12-14, 07:59 AM
#1
Corvette Z06 calipers and IS-F Rotors
Has anyone tried this vette/isf BBK setup on the 2G gs? I searched and saw a few people talk about it but never post results. The brackets made by LRD bolt up to the sc300 with little to no modification. I ordered the caliper bracket from LRD and i'm going to be doing a test fit of all the parts to see if this is doable. If anyone has any tips or info please chime in. I will post picture of my progress.
06-12-14, 08:58 AM
#2
Ask Jeff, he's the go too man! He's the only one that I've seen do this. Check the bottom of the page.
https://www.clublexus.com/forums/bui...thread-14.html
https://www.clublexus.com/forums/bui...thread-14.html
06-12-14, 09:11 AM
#3
Ask Jeff, he's the go too man! He's the only one that I've seen do this. Check the bottom of the page.
https://www.clublexus.com/forums/bui...thread-14.html
https://www.clublexus.com/forums/bui...thread-14.html
06-12-14, 08:55 PM
#5
I have the brackets too. Get under there and let me know how it goes! The GS spindle is different because the ball joint is on the same side that the calipers mount. I could be wrong but based off of pics, I think:
1. The bracket will need to be trimmed at the top so it doesn't hit the spindle
2. RCA's will be required so the caliper or bracket doesn't hit the ball joint
I haven't actually gotten under the car and looked but it would be great if you would. Let us know how it goes! I really want to get this project done but I don't want to move past the brackets until I can find some high disc faces to redo my wheels (I don't want to run spacers).
Also, the brake lines attach to the z06 calipers, so as long as the bracket goes on and the caliper doesn't hit the ball joint, it will work.
1. The bracket will need to be trimmed at the top so it doesn't hit the spindle
2. RCA's will be required so the caliper or bracket doesn't hit the ball joint
I haven't actually gotten under the car and looked but it would be great if you would. Let us know how it goes! I really want to get this project done but I don't want to move past the brackets until I can find some high disc faces to redo my wheels (I don't want to run spacers).
Also, the brake lines attach to the z06 calipers, so as long as the bracket goes on and the caliper doesn't hit the ball joint, it will work.
Last edited by tiger4life; 06-12-14 at 08:58 PM.
06-12-14, 08:56 PM
#6
Ask Jeff, he's the go too man! He's the only one that I've seen do this. Check the bottom of the page.
https://www.clublexus.com/forums/bui...thread-14.html
https://www.clublexus.com/forums/bui...thread-14.html
06-12-14, 09:01 PM
#7
I have the brackets too. Get under there and let me know how it goes! The GS spindle is different because the ball joint is on the same side that the calipers mount. I could be wrong but based off of pics, I think:
1. The bracket will need to be trimmed at the top so it doesn't hit the spindle
2. RCA's will be required so the caliper or bracket doesn't hit the ball joint
I haven't actually gotten under the car and looked but it would be great if you would. Let us know how it goes! I really want to get this project done but I don't want to move past the brackets until I can find some high disc faces to redo my wheels (I don't want to run spacers).
Also, the brake lines attach to the z06 calipers, so as long as the bracket goes on and the caliper doesn't hit the ball joint, it will work.
1. The bracket will need to be trimmed at the top so it doesn't hit the spindle
2. RCA's will be required so the caliper or bracket doesn't hit the ball joint
I haven't actually gotten under the car and looked but it would be great if you would. Let us know how it goes! I really want to get this project done but I don't want to move past the brackets until I can find some high disc faces to redo my wheels (I don't want to run spacers).
Also, the brake lines attach to the z06 calipers, so as long as the bracket goes on and the caliper doesn't hit the ball joint, it will work.
Last edited by hcharlesc3; 06-12-14 at 09:05 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
mikellucci
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
11
02-28-15 07:24 AM
