Suspension and Brakes Springs, shocks, coilovers, sways, braces, brakes, etc.

Lowering springs is 350 f sport 2013

Old 02-26-14, 03:38 AM
  #1  
Envisage
Driver School Candidate
Thread Starter
 
Envisage's Avatar
 
Join Date: Jan 2014
Location: WA
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default Lowering springs is 350 f sport 2013

Can anyone advise what springs they've used to lower the above car ?

Wanting something that lowers the front "around" 1 inch & 1/2 to 3/4" at the rear keeping the standard wheels.

Im chasing some that are ideally the same spring "rate" as what the car comes standard with, as the ride is perfect. I merely want to lower it for looks. I don't want an uncomfortable ride that's comes with some of the after market springs that are too stiff.

If you know what the spring rates are, even better. No one seems to know what the rate they come standard with ?

Not interested in tyre rub problems etc that stem from going to low.
Old 02-26-14, 06:32 AM
  #2  
FSPORTJC
Pole Position
 
FSPORTJC's Avatar
 
Join Date: Feb 2014
Location: Florida
Posts: 335
Likes: 0
Received 2 Likes on 2 Posts
Default

RS-R Down Springs!
Old 02-26-14, 11:54 AM
  #3  
IS350S2K
Pole Position
 
IS350S2K's Avatar
 
Join Date: Aug 2013
Location: CA
Posts: 304
Likes: 0
Received 6 Likes on 5 Posts
Default

Tein S-Techs. Ride felt like stock with the fsport wheels. You won't rub with stock wheels.
Old 02-26-14, 06:08 PM
  #4  
IS350Chic
Driver School Candidate
 
IS350Chic's Avatar
 
Join Date: Dec 2013
Location: FL
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default

I agree with "IS350S2K". Tein S-Tech. Drop is 1.0/1.2. I don't rub on my stocks and it does feel like stock.
Old 02-27-14, 05:52 AM
  #5  
Envisage
Driver School Candidate
Thread Starter
 
Envisage's Avatar
 
Join Date: Jan 2014
Location: WA
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by FSPORTJC
RS-R Down Springs!
OK, thanks you have any pics with them on yr car ?, any ideas on what they lowered it by ?

No issues with warranty etc from lexus ?
Old 02-27-14, 05:55 AM
  #6  
Envisage
Driver School Candidate
Thread Starter
 
Envisage's Avatar
 
Join Date: Jan 2014
Location: WA
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by IS350S2K
Tein S-Techs. Ride felt like stock with the fsport wheels. You won't rub with stock wheels.
OK, cheers you have any pics ?, any ideas on what they lowered it by ?

No issues with warranty etc from lexus ?, how much where they, they the ones off e bay ?

Im in australia & have the "Japanese" version, (not that it should make any difference)
Old 02-27-14, 05:58 AM
  #7  
Envisage
Driver School Candidate
Thread Starter
 
Envisage's Avatar
 
Join Date: Jan 2014
Location: WA
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by IS350Chic
I agree with "IS350S2K". Tein S-Tech. Drop is 1.0/1.2. I don't rub on my stocks and it does feel like stock.

Thanks IS 350 chis, you have any pics ?, Tein they're the Japanese, or American made ones ?

Think the stock springs are the perfect spring rate & balance of performance & comfort !
Old 02-27-14, 09:34 AM
  #8  
kenmakara
Driver School Candidate
 
kenmakara's Avatar
 
Join Date: Jan 2014
Location: Texas
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Tein S Techs!


Old 02-27-14, 04:39 PM
  #9  
Envisage
Driver School Candidate
Thread Starter
 
Envisage's Avatar
 
Join Date: Jan 2014
Location: WA
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Wow, perfect, exactly what im looking for, looks great, thanks !!!!

Tein S Techs hey ?, what did they cost & where did you buy them from ?

Did you notice any difference in comfort ?, they're not too stiff ?

Have you got any pics from further back, side on ?

Lexus say anything about voiding any factory warranty with doing it ?
Old 02-28-14, 08:12 AM
  #10  
kenmakara
Driver School Candidate
 
kenmakara's Avatar
 
Join Date: Jan 2014
Location: Texas
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Tein S Techs hey ?, what did they cost & where did you buy them from ?

http://www.ebay.com/itm/310833770409...84.m1497.l2649

Did you notice any difference in comfort ?, they're not too stiff ?

- It's very close to stock, but of course bumpier when going over dips and small humps. I've had one large person sit in the back once and no rubbing, but haven't had two people back there yet.

Have you got any pics from further back, side on ?

-I'll try to snap a pic later on.

Lexus say anything about voiding any factory warranty with doing it ?

-I haven't been back to Lexus for them to say anything to me, but I think if anything went wrong, Lexus needs to prove that it is the springs are the cause of the problem.
Old 02-28-14, 10:30 AM
  #11  
sc00b
Pole Position
 
sc00b's Avatar
 
Join Date: Oct 2013
Location: Texas
Posts: 275
Likes: 0
Received 1 Like on 1 Post
Default

RSR
Tein H Tech or S Tech
Old 03-03-14, 01:56 AM
  #12  
Envisage
Driver School Candidate
Thread Starter
 
Envisage's Avatar
 
Join Date: Jan 2014
Location: WA
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by kenmakara
Tein S Techs hey ?, what did they cost & where did you buy them from ?

http://www.ebay.com/itm/310833770409...84.m1497.l2649

Did you notice any difference in comfort ?, they're not too stiff ?

- It's very close to stock, but of course bumpier when going over dips and small humps. I've had one large person sit in the back once and no rubbing, but haven't had two people back there yet.

Have you got any pics from further back, side on ?

-I'll try to snap a pic later on.

Lexus say anything about voiding any factory warranty with doing it ?

-I haven't been back to Lexus for them to say anything to me, but I think if anything went wrong, Lexus needs to prove that it is the springs are the cause of the problem.
How do you know these are genuine "teins", i hear there are a lot of chinese copys on e bay ?
Old 03-03-14, 08:57 PM
  #13  
amoney805
Pole Position
iTrader: (1)
 
amoney805's Avatar
 
Join Date: Jan 2010
Location: ca
Posts: 304
Received 1 Like on 1 Post
Default

You're better off buying teins from an approved vender. There are plenty in the vendor market place. You about cheap knockoffs and helping the forums.
Old 03-04-14, 08:34 PM
  #14  
kenmakara
Driver School Candidate
 
kenmakara's Avatar
 
Join Date: Jan 2014
Location: Texas
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Envisage
How do you know these are genuine "teins", i hear there are a lot of chinese copys on e bay ?
I knew they were genuine by these guidelines:

http://www.tein.com/counterfeit/
Old 03-04-14, 09:12 PM
  #15  
Arioch
Rookie
 
Arioch's Avatar
 
Join Date: Jan 2014
Location: Ga
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Default

the drop doesn't look right for S-Techs, heres a pic of my H-Techs bought from B2Designs a CL vendor. drop is per Tein .8" front and .6" rear
Attached Thumbnails Lowering springs is 350 f sport 2013-photo-1-copy-2.jpg  

Thread Tools
Search this Thread
Quick Reply: Lowering springs is 350 f sport 2013



All times are GMT -7. The time now is 04:17 PM.