ClubLexus - Lexus Forum Discussion - S-Techs and RCA's, which camber setting?

ClubLexus - Lexus Forum Discussion (https://www.clublexus.com/forums/)

- Suspension and Brakes (https://www.clublexus.com/forums/suspension-and-brakes-185/)

- - S-Techs and RCA's, which camber setting? (https://www.clublexus.com/forums/suspension-and-brakes/520861-s-techs-and-rcas-which-camber-setting.html)

S-Techs and RCA's, which camber setting?

Hey guys just looking for a little input. I'll be getting my rear RCA's installed this week and just wondering what camber insert I should install? I will be on Tein Stechs and KYB GR2's and the rear should probably be lowered by about 2" with the RCA's. I was thinking that the +1 camber insert should be ok, what do you guys think?

Yeah dude, the lowest setting would be your best bet.

Quote:

Originally Posted by rgarjr (Post 5735871)

Yeah dude, the lowest setting would be your best bet.

Thanks for the reply.

use the middle setting for the rear RCA.

Quote:

Originally Posted by PHML (Post 5741854)

use the middle setting for the rear RCA.

But technically if I'm trying to keep a little more negative camber, the outer most setting will give me more negative camber right? After we talked the other night, I'm going to try and keep it on the outer setting to keep as much negative camber as possible and try and fit those wheels. I did have one of the guys pull my rear quarter panels, so I'm just going to go for it. Hopefully I can squeeze them on there. Last resort will be to down size my tires. I'll keep you posted. The Bilsteins came in today, so I should be able to see the height tomorrow and see if I need more of a pull to fit the 275's.