LS400 brakes and no ABS
02-12-10, 06:13 PM
#1
Lead Lap
Thread Starter
Join Date: Sep 2007
Location: Sydney, Australia
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
LS400 brakes and no ABS
My car does not have ABS.
I am planning on changing the FRONT brakes only
Will upgrading the brakes do anything to my braking performance, or should I not bother and simply change the pads/ rotors?
(JDM TT Brakes)
I am planning on changing the FRONT brakes only
Will upgrading the brakes do anything to my braking performance, or should I not bother and simply change the pads/ rotors?
(JDM TT Brakes)
02-12-10, 10:10 PM
#2
my abs went bad so i got rid of it. i also have ls400 front brakes. steel braided brake lines. stock rear brakes. brake modulation is not the best but i think its due to old fluid and master cylinder starting to show signs of wear. otherwise the brakes feel very good and predictive. i love them.
you will like this setup
you will like this setup
02-16-10, 09:17 PM
#7
if you are doing the ls400 brakes make sure to flush the brake fluid.
get some motul rbf600 or castrol srf. castrol is expensive and cost vs. performance is really not worth it.
motul is the way to go though. you can buy it for under 18 bucks a quart.
get some motul rbf600 or castrol srf. castrol is expensive and cost vs. performance is really not worth it.
motul is the way to go though. you can buy it for under 18 bucks a quart.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
