IS250 AWD vs RWD Upper Control Arm
#1
Pit Crew
Thread Starter
IS250 AWD vs RWD Upper Control Arm
I decided to replace my control arm because I stripped the castle nut. I bought a upper control arm and didn't inspect it. The UCA that I received looked strange. The AWD version of the UCA is uniform, symmetrical. The one I got is apparently for RWD and is kind of curved. It installed just fine, but I am wondering why AWD UCAs are seemingly non-existent (can't find them anywhere even on RockAuto), and RWD is different design but still fits?
Since I can't find a AWD version, can I get away with running RWD versions for now? The only difference is the knuckle is tilted a little further backwards. Threw off my alignment just a little bit, but that is because I have an AWD version on the right side.
Thanks for the help in advanced.
Since I can't find a AWD version, can I get away with running RWD versions for now? The only difference is the knuckle is tilted a little further backwards. Threw off my alignment just a little bit, but that is because I have an AWD version on the right side.
Thanks for the help in advanced.
Thread
Thread Starter
Forum
Replies
Last Post
adamhaver
LS - 4th Gen (2007-2017)
3
07-16-18 04:42 AM
LuvmyLS
LS - 4th Gen (2007-2017)
0
07-15-18 01:39 PM
lsflame
LS - 4th Gen (2007-2017)
4
10-06-15 07:34 PM