|
Anyone using Carbing sway bars?
I came across them today whil looking up some infor for a pretty hardcore customer....
Appear to be adjustable...front is 31.8mm and the rear is 27.2mm. I love Okuyama/Carbing products but I've never knew they made sways before today... |
Those bars are smaller than the Daizen bars which are 35mm front and 28.5mm rear. The stock measurements for a 92-96 are 30mm front and 20mm rear. The 98 and up came with a little bigger front sway bar (maybe a 1 or 2 mm).
Just installed Daizens on my 98 and it made a huge difference in handling, even with stock wheels and rims. |
Carbing I haven't heard of that brand in aaaaaages! Unfortunately no one sells that stuff here in Aus... Roo do you have any websites or any info on them? I was just curious to see what they have for our cars (in Hyper Rev I saw their air diversion plate but that's all).
|
Originally Posted by bjchapman
Those bars are smaller than the Daizen bars which are 35mm front and 28.5mm rear. The stock measurements for a 92-96 are 30mm front and 20mm rear. The 98 and up came with a little bigger front sway bar (maybe a 1 or 2 mm).
Just installed Daizens on my 98 and it made a huge difference in handling, even with stock wheels and rims.
Originally Posted by Soarer_25GTT
Carbing I haven't heard of that brand in aaaaaages! Unfortunately no one sells that stuff here in Aus... Roo do you have any websites or any info on them? I was just curious to see what they have for our cars (in Hyper Rev I saw their air diversion plate but that's all).
The Vertex D1GP Soarer is sponsored by carbing...it has a roll cage, tower bars, and that cooling plate you're talking about as well. I have a source in Australia for al your JDM needs: Motosport Performance www.motosp.com Phone: 0414186264 E-mail: sales@motosp.com Ask for Judd and tell em roo sent you, he'll treat yah right ;) |
Cool, thanks for the link!
|
| All times are GMT -7. The time now is 05:37 PM. |
© 2026 MH Sub I, LLC dba Internet Brands