Trav IS200T
#1
Rookie
Thread Starter
Trav IS200T
I figured I would go ahead and post my build now! I have a lot more planned after New Year but as for now this is what I’ve got!
2016 IS200T
Purchased back in 2015
Obsidian Black Exterior / Nebula Grey Interior
Miles: 29,351
Current Mods:
Invidia Midpipe
Invidia Axleback
3” Cutoff Valve before mid resonators
PPE Engineering Catless Downpipe
BMS Stage 1 Tune
HTP Charge Pipe
K&N Air filter
Fitch Fuel Catch Can
Aftermarket Body Kit
212 Obsidian Body Moldings
Chrome delete wrapped gloss black
RGB Halos/Demon Eyes/DRL
RGB Underglow
RGB Interior LEDs
Switchback Turn Signals
Painted Headlights and Shrouds
Debadged rear emblems
In Progress:
I have but haven’t installed
Headlight Eyelids
Side skirt
20mm Wheel Spacers
Will buy:
Vossen Rims
AEM E85 Compatitable Fuel Pump
E85 Fuel Tune
TTI Muffler Delete
Skunk Throttle Body
RSR Lowering Springs
Seibon Carbon Fenders
Snow Performance Methanol Cooler Kit
Full Vehicle Wrap
Greddy BOV
Boost Controller
This is the completed list! Tell me what you guys think!
2016 IS200T
Purchased back in 2015
Obsidian Black Exterior / Nebula Grey Interior
Miles: 29,351
Current Mods:
Invidia Midpipe
Invidia Axleback
3” Cutoff Valve before mid resonators
PPE Engineering Catless Downpipe
BMS Stage 1 Tune
HTP Charge Pipe
K&N Air filter
Fitch Fuel Catch Can
Aftermarket Body Kit
212 Obsidian Body Moldings
Chrome delete wrapped gloss black
RGB Halos/Demon Eyes/DRL
RGB Underglow
RGB Interior LEDs
Switchback Turn Signals
Painted Headlights and Shrouds
Debadged rear emblems
In Progress:
I have but haven’t installed
Headlight Eyelids
Side skirt
20mm Wheel Spacers
Will buy:
Vossen Rims
AEM E85 Compatitable Fuel Pump
E85 Fuel Tune
TTI Muffler Delete
Skunk Throttle Body
RSR Lowering Springs
Seibon Carbon Fenders
Snow Performance Methanol Cooler Kit
Full Vehicle Wrap
Greddy BOV
Boost Controller
This is the completed list! Tell me what you guys think!
Last edited by ModTrav; 10-16-18 at 06:56 PM. Reason: Pictures
#4
Rookie
Thread Starter
Yea it takes some time for TTI products to get here in the US! Seems like everything always gets back ordered or out of stock so fast but obviously they don't have much competition. As for tuning capabilties, I am taking my time and just sticking with my BMS Stage 1 tune for now and will be sending back for the new JB4 they are about to release. As for the mean time, I have a tuner in Canada that has been working on cracking into the ECU of our cars and just patiently waiting on what they can do as for eliminating the horrible turbo lag. Also I heard the RR Racing has on the books to begin working on their own tune as well for the IS200T. Not sure when they will begin but should be sooner than later. TTI Stage 2+ tune is a great tune but just steep on price. Tony is still working diligently on unleashing more power but I am exploring more ways of reaching 300hp+. Will keep you updated with more shortly.
#5
Your #1 Lexus Vendor
iTrader: (8)
Awesome start to a build, the end result will be insane!
Let us know how we can help.
-Josh
Let us know how we can help.
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#6
Rookie
Thread Starter
The following users liked this post:
Meraki Autoworks (10-19-18)
Trending Topics
#8
Rookie
Thread Starter
Honestly the guy who built my headlights put them in for me as a gift for how much I was spending haha. I’m sure you get find some on eBay or superbightled they should have some for our vehicle but make sure you buy resistor for hyper flash warning cancel. You will need one for both turn signals.
#9
Driver School Candidate
Join Date: Jan 2021
Location: Indiana
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I figured I would go ahead and post my build now! I have a lot more planned after New Year but as for now this is what I’ve got!
2016 IS200T
Purchased back in 2015
Obsidian Black Exterior / Nebula Grey Interior
Miles: 29,351
Current Mods:
Invidia Midpipe
Invidia Axleback
3” Cutoff Valve before mid resonators
PPE Engineering Catless Downpipe
BMS Stage 1 Tune
HTP Charge Pipe
K&N Air filter
Fitch Fuel Catch Can
Aftermarket Body Kit
212 Obsidian Body Moldings
Chrome delete wrapped gloss black
RGB Halos/Demon Eyes/DRL
RGB Underglow
RGB Interior LEDs
Switchback Turn Signals
Painted Headlights and Shrouds
Debadged rear emblems
In Progress:
I have but haven’t installed
Headlight Eyelids
Side skirt
20mm Wheel Spacers
Will buy:
Vossen Rims
AEM E85 Compatitable Fuel Pump
E85 Fuel Tune
TTI Muffler Delete
Skunk Throttle Body
RSR Lowering Springs
Seibon Carbon Fenders
Snow Performance Methanol Cooler Kit
Full Vehicle Wrap
Greddy BOV
Boost Controller
This is the completed list! Tell me what you guys think!
2016 IS200T
Purchased back in 2015
Obsidian Black Exterior / Nebula Grey Interior
Miles: 29,351
Current Mods:
Invidia Midpipe
Invidia Axleback
3” Cutoff Valve before mid resonators
PPE Engineering Catless Downpipe
BMS Stage 1 Tune
HTP Charge Pipe
K&N Air filter
Fitch Fuel Catch Can
Aftermarket Body Kit
212 Obsidian Body Moldings
Chrome delete wrapped gloss black
RGB Halos/Demon Eyes/DRL
RGB Underglow
RGB Interior LEDs
Switchback Turn Signals
Painted Headlights and Shrouds
Debadged rear emblems
In Progress:
I have but haven’t installed
Headlight Eyelids
Side skirt
20mm Wheel Spacers
Will buy:
Vossen Rims
AEM E85 Compatitable Fuel Pump
E85 Fuel Tune
TTI Muffler Delete
Skunk Throttle Body
RSR Lowering Springs
Seibon Carbon Fenders
Snow Performance Methanol Cooler Kit
Full Vehicle Wrap
Greddy BOV
Boost Controller
This is the completed list! Tell me what you guys think!
Thread
Thread Starter
Forum
Replies
Last Post
Corbins350
IS - 2nd Gen (2006-2013)
4
11-18-16 01:36 PM