anacortes

With my driver door sagging a bit I'm figuring I need new hinges. Is there a vendor for these parts?

Duck05

Junk yards or eBay are a place to start... I do not believe these are available from Lexus but you can call any dealership parts department and ask....

KahnBB6

iTrader: (5)

Here's what I have been meaning to look into for my own SC in the future. I hope the fellow mentioned on PlanetSoarer still does this out of Australia.

http://www.planetsoarer.com/hinges/index.htm
http://lexusaustralia.org/technical_...oor_hinges.htm

Blkexcoupe

iTrader: (8)

They're still available. They're around $450-500 each.

I remember a couple of years ago someone was selling rebuilt hinges from Daryl. He mentioned it was a 4 month wait and ended up costing $340 after shipping.

LEXXIUM

iTrader: (1)

Halon

iTrader: (6)

Yep I bought a set from the guy in Australia last year. Still sitting here in a box because I don't know how the hell I'm going to replace them considering how heavy these doors are.

Returd

I have freshly rebuilt driver and passenger hinges, brass bushings, new pins, grease fittings, zero sag. $350 Canadian + shipping.

Ontario Canada

Photon440

iTrader: (3)

When I bought a rebuilt hinge from Daryl, he included pictures and instructions for a wooden door holder brace that worked quite well for me. The doors aren't that heavy, 92 lbs. isn't hard to handle.
https://www.clublexus.com/forums/sc-...-pictures.html

Returd

CoOl21

RH 68710-24031
LH 68720-24031

Only a few left available, might go OBS once they are gone

Returd

what's OBS?

Are new hinges still available through Lexus?

The ones I rebuilt use greasable bronze bushings and new pins instead of the factory needle bearings.

CoOl21

Obsolete, and yes they are brand new

Returd

nice, how much? My local dealer said unavailable

CoOl21

You're in Ontario Canada?! too much money... we get shafted hard for these parts...
PM me your details if you're serious about getting them.

Returd

I'm not buying, I'm selling rebuilt ones. I had a set made for myself and had a few extra pairs done at the same time. Limited number available as I won't be rebuilding any more.