Want to get a similar setup with the rims and tires.
#1
Driver
Thread Starter
Want to get a similar setup with the rims and tires.
I wish I knew the owner so I could ask, but do you guys think you can make a guess. What size Rim and tire? The tire wall looks a lot smaller than the stock one so I wonder what size they are .
The following users liked this post:
QwkSC (10-17-19)
#3
Driver
Thread Starter
#5
Driver
Thread Starter
Thank you this helps a lot. Are the cvt similar in looks, besides the center caps and those being forged and these are not?
#6
Driver
Thread Starter
#7
Former Sponsor
iTrader: (2)
This is the Infini-lip, where the wheel face to barrel is a seamless transition.
This is the standard setup on most wheels.
This is a CVT with the valve stem area pushed back into the wheel and pretty much how all CVT come.
The following users liked this post:
SoSlow (04-25-18)
Trending Topics
#9
Driver
Thread Starter
CVT are similar in looks in terms of direction spoke design. Only difference would be that the valve stem area is set back half way into the wheels and limited sizes with 10.5 being the widest.
This is the Infini-lip, where the wheel face to barrel is a seamless transition.
This is the standard setup on most wheels.
This is a CVT with the valve stem area pushed back into the wheel and pretty much how all CVT come.
This is the Infini-lip, where the wheel face to barrel is a seamless transition.
This is the standard setup on most wheels.
This is a CVT with the valve stem area pushed back into the wheel and pretty much how all CVT come.
Thread
Thread Starter
Forum
Replies
Last Post