When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
As you all probably know, last year we began our 3IS development project with a 2014 IS350 F-Sport AWD. We have posted lots of tuning results for the car as we tested our tunes with exhaust and with PPE headers.
We began our Supercharger kti development on the IS350 AWD, and then exchanged the AWD car for a RWD 2014 F-Sport earlier this year.
What we have done so far:
(1) Custom exhaust and PPE headers, RR-Racing tune
(2) RR-Racing Road & Track coilovers with full "true" coilover conversion of the rear suspension
(3) RR-Racing USRS Ultimate steering response bushings.
(4) RR-Racing 2UR-GSE Supercharger (details to be posted this week).
__________________
We Engineer Track Proven Upgrades For Your Lexus! SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
Some specs on our new coilovers and brake systems for the 2014+ IS/RC/GS:
Front brakes: 14" solid disks (same size as ISF), curved vane, with Wilwood Aero 6-piston calipers. Calipers are the same as Wilwood uses on their Corvette competition kits. Features forged monoblock construction, and differential bore stainless steel pistons. Rear brakes: 13.6" solid disks (same disk as on the RCF), curved vane, with Wilwood forged Superlite 4 piston calipers.
Brakes are available custom powder coated.
Suspension: Same suspension as developed on our Supercharged ISF shop car:
Complete conversion of the rear suspension from divorced spring setup to "true coilover." This allows for higher spring rates which are essential for better handling.
Afco Racing billet aluminum shock absorbers custom valved to our specification. These American made adjustable monotube shocks are very light, can easily be rebuilt, and are extremely reliable. Much higher quality than the cheap imported shocks.
Available with your choice of custom spring rates. Springs are made in the USA by Hypercoil, and feature dual main/helper spring setup.
__________________
We Engineer Track Proven Upgrades For Your Lexus! SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
We recently released new Lexus "L" and "F" billet front badges. Not only does this look better than the large cheapo plactic front badge, but our badge allows air to pass through, improving cooling, particularly when coupled with our new oil cooler which will sit behind the badge.
__________________
We Engineer Track Proven Upgrades For Your Lexus! SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
How much for the coilovers? Also, are they AVS compatible?
Originally Posted by RRRacing
Some specs on our new coilovers and brake systems for the 2014+ IS/RC/GS:
Front brakes: 14" solid disks (same size as ISF), curved vane, with Wilwood Aero 6-piston calipers. Calipers are the same as Wilwood uses on their Corvette competition kits. Features forged monoblock construction, and differential bore stainless steel pistons. Rear brakes: 13.6" solid disks (same disk as on the RCF), curved vane, with Wilwood forged Superlite 4 piston calipers.
Brakes are available custom powder coated.
Suspension: Same suspension as developed on our Supercharged ISF shop car:
Complete conversion of the rear suspension from divorced spring setup to "true coilover." This allows for higher spring rates which are essential for better handling.
Afco Racing billet aluminum shock absorbers custom valved to our specification. These American made adjustable monotube shocks are very light, can easily be rebuilt, and are extremely reliable. Much higher quality than the cheap imported shocks.
Available with your choice of custom spring rates. Springs are made in the USA by Hypercoil, and feature dual main/helper spring setup.
How much for the coilovers? Also, are they AVS compatible?
Not AVS compatible yet... problem with AVS is that there is stock actuators have very little movement so while we haven't tested it yet, it may not make much of a difference in damping.
Rafi
__________________
We Engineer Track Proven Upgrades For Your Lexus! SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
It's great to finally see the RR-Racing Supercharger kit at its final stage of development before being released to the public (it's been over a year and a half since you first started exploring this option). Are you able to disclose at this time if the new kit can also take advantage of the 2GR-FSE rev limiter increase from the ECU tune (e.g. 7000-7200 RPMs)?
It's great to finally see the RR-Racing Supercharger kit at its final stage of development before being released to the public (it's been over a year and a half since you first started exploring this option). Are you able to disclose at this time if the new kit can also take advantage of the 2GR-FSE rev limiter increase from the ECU tune (e.g. 7000-7200 RPMs)?
In another thread they said the rev limit is capped at 6000rpm for ~366WHP. With Performance Stages increasing rev limiter or increasing pulley size.
It's great to finally see the RR-Racing Supercharger kit at its final stage of development before being released to the public (it's been over a year and a half since you first started exploring this option). Are you able to disclose at this time if the new kit can also take advantage of the 2GR-FSE rev limiter increase from the ECU tune (e.g. 7000-7200 RPMs)?
Actually the 2IS kit will likely have a higher rev limiter than the 3IS kit, depending on the desired power output. The 2IS ECU is totally different than the 3IS ECU, so in some ways its easier to tune it.
We are actually looking for a good 2IS candidate for SC install in November.
Rafi
__________________
We Engineer Track Proven Upgrades For Your Lexus! SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
You guys should make a black / dark grey version of the front badges. I like that you've added functionality but I like the look of my dark smoke emblem even better on the black grill.
Can't wait to see the SC kit. I'm in NJ and will definitely coming to you guys for some work in the future.
You guys should make a black / dark grey version of the front badges. I like that you've added functionality but I like the look of my dark smoke emblem even better on the black grill.
Can't wait to see the SC kit. I'm in NJ and will definitely coming to you guys for some work in the future.
Actually we have that... if you go to our website, you can order the emblems custom powder coated to a variety of colors.
Rafi
__________________
We Engineer Track Proven Upgrades For Your Lexus! SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
10-09-17, 12:33 PM
RR Racing Supercharged IS350 Build
