GS - 4th Gen (2013-2020) Discussion about the 2013 and up GS models

What did you do to your GS today?

Thread Tools
 
Search this Thread
 
Old 01-16-17, 01:48 PM
  #1  
06ls430KTC
Intermediate
Thread Starter
 
06ls430KTC's Avatar
 
Join Date: Mar 2012
Location: Florida
Posts: 398
Received 67 Likes on 50 Posts
Default What did you do to your GS today?

just finished washing mine using Pinnacle wash and pinnacle liquid wax afterwards. I used a leaf blower to assist in drying off the car I also washed the wife's 2013 Accord Coupe. Ready for the rain now
The following 3 users liked this post by 06ls430KTC:
Lex76 (07-11-19), sprigmo1 (02-19-20), zyrtek69 (05-09-19)

Popular Reply

04-13-23, 12:13 PM
Nunz
Pit Crew
 
Nunz's Avatar
 
Join Date: May 2021
Location: PA
Posts: 177
Received 120 Likes on 56 Posts
Default

Just picked up my new 2016 GSF earlier this weekend, and let go of my 2015 GS350 AWD w/ F-Sport Forged Rims to another GS enthusiast



Old 01-16-17, 04:31 PM
  #2  
CW88
Driver School Candidate
 
CW88's Avatar
 
Join Date: Dec 2016
Location: Vancouver
Posts: 7
Received 1 Like on 1 Post
Default

I added a dashcam today. A thinkware F750..w/ upgraded firmware to F770.
waiting on hardwire kit now.
The following users liked this post:
Lex76 (07-11-19)
Old 01-16-17, 04:45 PM
  #3  
06ls430KTC
Intermediate
Thread Starter
 
06ls430KTC's Avatar
 
Join Date: Mar 2012
Location: Florida
Posts: 398
Received 67 Likes on 50 Posts
Default

After dinner, I went back over the windows and cleaned off a few drops that had accumulated.
The following 4 users liked this post by 06ls430KTC:
corpnupe85 (06-21-17), Deann26 (01-06-21), Lex76 (07-11-19), tatarin (08-09-21)
Old 01-16-17, 05:34 PM
  #4  
AJLex19
Lead Lap
 
AJLex19's Avatar
 
Join Date: Mar 2014
Location: NY
Posts: 3,613
Received 1,130 Likes on 838 Posts
Default

Nothing glamorous - PSI was down to 30 all around - added about 3lbs in each tire.
The following 2 users liked this post by AJLex19:
corpnupe85 (06-21-17), Lex76 (07-11-19)
Old 01-16-17, 05:54 PM
  #5  
Sevn86
Pole Position
 
Sevn86's Avatar
 
Join Date: Apr 2012
Location: Texas
Posts: 2,233
Received 83 Likes on 55 Posts
Default

Drove it to work and back.
The following 7 users liked this post by Sevn86:
corpnupe85 (06-21-17), icee1 (10-15-19), Ktrav103 (10-16-20), Lex76 (07-11-19), MGs350 (03-16-22), onizukhoa (11-04-23), rehall7 (03-02-20) and 2 others liked this post. (Show less...)
Old 01-16-17, 06:03 PM
  #6  
bclexus
Lexus Test Driver
 
bclexus's Avatar
 
Join Date: Nov 2014
Location: Dallas, Texas
Posts: 8,930
Received 1,991 Likes on 1,415 Posts
Default

Blew the soot out with a few WOT runs from a running-start to over 100 mph. Always enjoyable.
The following 4 users liked this post by bclexus:
joebug (09-03-21), Lex76 (07-11-19), Mangsailor (07-25-22), rehall7 (03-02-20)
Old 01-17-17, 04:40 AM
  #7  
krsin9753
Driver School Candidate
 
krsin9753's Avatar
 
Join Date: Jun 2015
Location: Florida
Posts: 13
Received 0 Likes on 0 Posts
Default leather seats

I just got a 2016 GS350 and thought the front seats leather is somewhat stiff, so I treated twice with Mothers, but no change so it may be a tougher material.
Any thoughts?
Old 01-17-17, 05:14 AM
  #8  
57Strat777
Driver School Candidate
 
57Strat777's Avatar
 
Join Date: Jan 2017
Location: Texas
Posts: 37
Likes: 0
Received 5 Likes on 3 Posts
Default

Originally Posted by krsin9753
I just got a 2016 GS350 and thought the front seats leather is somewhat stiff, so I treated twice with Mothers, but no change so it may be a tougher material.
Any thoughts?

Car leather seats are typically treated with a sealer to keep anything from soaking into the leather to prevent staining. So leather treatment or conditioner probably won't have much of an effect on the leather.
The following 3 users liked this post by 57Strat777:
krsin9753 (01-17-17), Met1life (02-22-23), rk1972 (10-01-22)
Old 01-17-17, 06:11 AM
  #9  
Patrick4GS
Rookie
iTrader: (2)
 
Patrick4GS's Avatar
 
Join Date: Nov 2016
Location: ON
Posts: 78
Received 15 Likes on 12 Posts
Default

Replaced the driver side mirror cap since mine had a nasty paint chip out of it. OEM painted part from Lexus was a perfect match and install was under half an hour.

Also installed OEM painted mud guards that I ordered from a Toyota dealer in Japan. Great fit and again, perfect paint match.
The following users liked this post:
Lex76 (07-11-19)
Old 01-17-17, 06:14 AM
  #10  
AJLex19
Lead Lap
 
AJLex19's Avatar
 
Join Date: Mar 2014
Location: NY
Posts: 3,613
Received 1,130 Likes on 838 Posts
Default

Originally Posted by Patrick4GS
Replaced the driver side mirror cap since mine had a nasty paint chip out of it. OEM painted part from Lexus was a perfect match and install was under half an hour.

Also installed OEM painted mud guards that I ordered from a Toyota dealer in Japan. Great fit and again, perfect paint match.
May I ask: How much did you pay for the painted mud guards? Seen them on eBay for $340+
Old 01-17-17, 08:11 AM
  #11  
06ls430KTC
Intermediate
Thread Starter
 
06ls430KTC's Avatar
 
Join Date: Mar 2012
Location: Florida
Posts: 398
Received 67 Likes on 50 Posts
Default

Originally Posted by Patrick4GS
Replaced the driver side mirror cap since mine had a nasty paint chip out of it. OEM painted part from Lexus was a perfect match and install was under half an hour.

Also installed OEM painted mud guards that I ordered from a Toyota dealer in Japan. Great fit and again, perfect paint match.
pictures???
Old 01-17-17, 09:22 AM
  #12  
Patrick4GS
Rookie
iTrader: (2)
 
Patrick4GS's Avatar
 
Join Date: Nov 2016
Location: ON
Posts: 78
Received 15 Likes on 12 Posts
Default

Originally Posted by 06ls430KTC
pictures???
It is terrible weather outside today, I will hopefully have pictures later in the week.

Originally Posted by AJLex19
May I ask: How much did you pay for the painted mud guards? Seen them on eBay for $340+
Those are probably the same parts I picked up. Selling for $300 before shipping.
Old 01-17-17, 09:45 AM
  #13  
AJLex19
Lead Lap
 
AJLex19's Avatar
 
Join Date: Mar 2014
Location: NY
Posts: 3,613
Received 1,130 Likes on 838 Posts
Default

Originally Posted by Patrick4GS
It is terrible weather outside today, I will hopefully have pictures later in the week.


Those are probably the same parts I picked up. Selling for $300 before shipping.
Gotcha...Did you need to drill holes to get them to mount correctly?
Old 01-17-17, 10:58 AM
  #14  
Davenlei
Advanced
iTrader: (1)
 
Davenlei's Avatar
 
Join Date: Jul 2011
Location: CA
Posts: 732
Received 92 Likes on 72 Posts
Default

Put the 'F Sport' stickers on my front calipers.
The following 2 users liked this post by Davenlei:
Beatmd (07-02-23), Lex76 (07-11-19)
Old 01-17-17, 11:58 AM
  #15  
djrabbi
Lead Lap
iTrader: (2)
 
djrabbi's Avatar
 
Join Date: Jul 2015
Location: VA
Posts: 486
Likes: 0
Received 26 Likes on 23 Posts
Default

Just bought these for mine... My friend had them on his BMW E60 and was surprised

http://www.ebay.com/itm/282320942171?_trksid=p2060353.m1438.l2649&var=581420111547&ssPageName=STRK%3AMEBIDX%3AIT
The following users liked this post:
and3re (05-19-17)


Quick Reply: What did you do to your GS today?



All times are GMT -7. The time now is 10:23 PM.