Selling the car so the kit has to go, every single item is brand new. I pieced and purchased the kit together and put in storage. So heres what i have for you guys, everything you need to go NA-T.

1) Cxracing t70 Turbo Kit

http://www.cxracing.com/mm5/merchant...ry_Code=TRBSUP

(Item(s) Included
- T70 Turbo, 4" Air Inlet
- Stainless Steel manifold
- 50mm 10 PSI Wastegate, with Dump tube
- Oil Feeding line kit, Sandwich
- 3" Downpipe
- 4" Intake and Air Filter

Highlights:
- Completely Test Fitted on SC300, GS300, and Supra MK3.
- Big Turbo, Support up to 500 HP.
- 3" V-Band Downpipe.
- 304 Stainless Steel Manifold, Equal Length Runner,High Flow Exhaust Design.
- Comes with Oil Sandwich and Oil Line kit.
- External 50mm Wastegate, with 10PSI default. Can be upgraded to Higher Boost Wastegate.
- Fitment is Fully Tested, Fitment very Well, not hitting other Parts.)

2) Oil Feed and Drain

-IS300 union bolt w/Gasket
-Is300 union bolt to 4an feed fitting
-Driftmotion AZ Oil drain Pan Flange
-5ft of 4an SS oil line
-3ft of 10an SS oil line
-Black boostec fittings for feed and drain -oil lines
-4an turbo feed flange
-10an turbo draim flange
-OEM 2jzgte oil drain pan studs w/bolts
-Permatex high temp sealant for the is300 union bolt to 4an fitting

-Included will be the tools needed to drill your pan
-M8x1.25 tap kit
-7/8 holesaw for drain hole
-Angle chuck for your drill

3)Intercooler & BOV

-Black Cxracing 4" Intercooler 32x12x4
-Xspower Black 50mm BOV
-2.5" pipe with bov flange
-Cxracing 2.5" piping/couplers/clamps
-Black 6 port vaccum manifold for ease of running vaccum to boost gauge, wastegate, bov, etc.
-Cxracing 2.5" intercooler piping kit X2
16 assorted pipes, 16 couplers, 32 clamps
(i purchased 2 sets of kits to have enough to route the piping in any way possible, i can assist you in how i was going to route the piping if needed)

Also included is the following Xtras

.Glowshift 7 color Boost gauge w/Rev9 gauge mount
.titanium Turbo Blanket

Price: $1300 picked up, might be willing to ship under your expense. Paid over 1500 for everything and everything is new in its box, not looking to lose to much.

If interested or if you have any questions please contact me at 661-900-7870

Thanks

I will have pics up tomorow!

 

Very interested could you get me a shipping quote to 08052 maple shade nj?

 

How much power can this kit deliver?
What else is needed to get around 500rwhp?
Thanks!

 

This kit will make approximately 300-330 whp on the 10psi. After that it's pushing it on stock fuel system.

For 500+ youl need gasket, fuel delivery, engine management, etc.

 

Kit is sold, thanks

 

Payment sent awaiting arrival!!

 

Mods, package has arrived. Items are as stated, I am leaving positive feedback now. I'd like to say for public viewing while sending money as a gift is not recommended I did so with golden95sc and everything went smooth.

 

Good to hear, now where's the build thread