Notices

NY Fs: Upper control arms w/daizen bushings

 
Thread Tools
 
Search this Thread
 
Old May 9, 2011 | 07:18 PM
  #1  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default Fs: Upper control arms w/daizen bushings

Okay I have these OEM arms sitting in the house for about a year now. I have been meaning to install them for the longest while. I purchased them from a member on here.

But I have done some research and come to the consensus that it wouldn't be good for me since I drive in a VERY rough city and I feel that I wouldn't be able to handle the added stiffness.

So anyhow, these arms are in VERY good condition, Ball joints are still and firm. Even better than the arms that I will be putting in. They are almost like new. And Daizen bushings already pressed into them which saves money. In fact the arms were never installed after the bushings were pressed in. New arms go for about $400 each and getting the bushings pressed in is another labor cost.

Improves handling a great deal from what I'm told and researched.

So this will be a great savings for whoever



price is $235 shipped OBO

E-Mail me @ kosi857@yahoo.com for fastest response

Last edited by KingNasGS4; May 22, 2011 at 04:22 PM. Reason: added email address.
Old May 10, 2011 | 09:31 AM
  #2  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default

I'm a little negotiable on the price but don't lowball. These are being sold for half of what one arm is being sold for brand new. Be fair. and not to mention the bushings.

So I think its a pretty fair price
Old May 11, 2011 | 11:59 PM
  #3  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default

bump to the top
Old May 14, 2011 | 02:39 PM
  #4  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default

to the top? buyer flaked
Old May 17, 2011 | 02:05 AM
  #5  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default

no one wants better handling?
Old May 20, 2011 | 11:34 PM
  #6  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default

to the top again. Prices are OBO
Old May 21, 2011 | 09:55 PM
  #7  
perry05g35's Avatar
perry05g35
Lead Lap
iTrader: (4)
 
Joined: Jul 2007
Posts: 456
Likes: 5
From: Texas/Hawaii
Default

New to suspension modds aside from getting lowering springs on some of my cars in the past. Are the Upper control arms & bushings only for the front wheels? Nothing in the rear?
Old May 21, 2011 | 10:29 PM
  #8  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default

There are rear upper control arms but no aftermarket bushings that I know of for the rear.
Old May 22, 2011 | 02:38 AM
  #9  
vscalais's Avatar
vscalais
Pole Position
iTrader: (1)
 
Joined: May 2010
Posts: 251
Likes: 4
From: NSW, Australia
Default

I will buy them if the cost of postage to Sydney, NSW Australia is reasonable. Can you enquire please?
Old May 22, 2011 | 03:11 AM
  #10  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default

I will look for a price
Old May 22, 2011 | 01:12 PM
  #11  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default

Australia prices are crazy man. like 60 bucks seem like ups is even worse.

Last edited by KingNasGS4; May 22, 2011 at 04:23 PM.
Old May 22, 2011 | 07:16 PM
  #12  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default

flakers are way too prevalent if you arent 100 percent interested, dont pretend to be.
Old May 23, 2011 | 05:08 AM
  #13  
vscalais's Avatar
vscalais
Pole Position
iTrader: (1)
 
Joined: May 2010
Posts: 251
Likes: 4
From: NSW, Australia
Default

Originally Posted by kosi718
flakers are way too prevalent if you arent 100 percent interested, dont pretend to be.
WTF? Who are you calling a flaker? Hope you weren't referring to me!

Have just sent you a PM but need to know who you were referring to first.
Old May 23, 2011 | 05:14 AM
  #14  
KingNasGS4's Avatar
KingNasGS4
Thread Starter
Instructor
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,202
Likes: 3
From: Brooklyn, NYC
Default

Not you man. Don't worry about that
Old May 24, 2011 | 09:15 PM
  #15  
PR FIEBRU's Avatar
PR FIEBRU
Advanced
 
Joined: Nov 2005
Posts: 637
Likes: 6
From: New York City
Default

Would u sell one side. Where R u located?



All times are GMT -7. The time now is 07:26 AM.