Recommended mods, big or small?
#1
Recommended mods, big or small?
Hi guys, just got myself a LC500!
i was wondering what mods you would recomend doing? I am thinking lowering springs, exhuast, sideskirts + front lip, wheels and vicrez mudflaps?
I would love some feedback on what big or small mods you guys have done, and what website to buy the parts from!
i was wondering what mods you would recomend doing? I am thinking lowering springs, exhuast, sideskirts + front lip, wheels and vicrez mudflaps?
I would love some feedback on what big or small mods you guys have done, and what website to buy the parts from!
#2
Only things I will be doing to mine are carbon fiber engine bay, carbon side skirts, carbon front splitter and carbon rear defuser with maybe an armytrix exhaust. All of which are reversable. I have never seen an LC with mudflaps though.
#3
Your #1 Lexus Vendor
iTrader: (8)
Exhaust, wake up the v8.
-Josh
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#4
Instructor
I was going to get a bodykit, but i realized that after examining the side profile of the LC (at least convertible anyways), the greenhouse area is already quite small. Basically the percentage of the body seems significantly more than the glass/visible. If i added any more body pieces she'll seem that much more chunky and might be a bit too much.
The area beneath the door opening is tapered in, and angled up to make it look like a narrow waist. Most bodykits ive seen, exaggerated this slimming part outwards and increase the mass.
The area beneath the door opening is tapered in, and angled up to make it look like a narrow waist. Most bodykits ive seen, exaggerated this slimming part outwards and increase the mass.
The following users liked this post:
2959 (05-22-24)
#5
This is the subtle kit I will most likely go with. I would get it in carbon fiber for my white LC. It uses the factory bolts and clips so totally removable if you want it back to stock and it's not chunky in any way.
https://niaautodesign.com/products/l...-body-kit-2018
https://niaautodesign.com/products/l...-body-kit-2018
The following users liked this post:
Badhobz (05-22-24)
#6
Instructor
that Nia kit looks quite nice. Also its reasonably priced too
The following users liked this post:
zissis (05-22-24)
#7
Your #1 Lexus Vendor
iTrader: (8)
We can get you guys discounts on NIA Auto kits. We're an authorized dealer.
-Josh
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
The following users liked this post:
StuM (05-23-24)
Trending Topics
#8
i have this kind of stone chip protecters on my Supra aswell and the blend in good and dose a great job protecting the paint
#9
Instructor
In my opinion, the LC doesn't need much if any, it looks and sounds great as it is in OEM form.
However, the most I would ever do is a light drop with some wheels.
However, the most I would ever do is a light drop with some wheels.
The following 2 users liked this post by tofuprod:
F1nALMSfan (05-24-24),
PontanB (05-24-24)
Thread
Thread Starter
Forum
Replies
Last Post