anyone own JCSPORTLINE parts ????
#18
Driver School Candidate
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![](https://cimg0.ibsrv.net/gimg/www.clublexus.com-vbulletin/1512x1512/img_2898_198fd12cbb77db79c3a17b6d2d1a9cdd9e76fcb5.jpg)
here is a photo of mine after install. i would say the fitment was about an 8/10 there is slight gaps were the reflectors sit. but im also a perfectionist. for the price it is well worth it.
The following users liked this post:
minhael (06-20-17)
#19
Pole Position
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Does it just stick on to the grey bumper or does it have to be removed? I just want something simple as a bolt onto the grey bumper.
#20
#21
Pole Position
#22
Driver School Candidate
Thread Starter
#23
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Bumper removal was required for me as the two bolts that holds onto the reflectors was nearly impossible to reach without a low profile screwdriver.
My fitment was pretty bad but in other words, it is a replica product so you cannot expect much. My carbon fiber design was also off by noticeable 6 inches as one goes one way and another goes the opposite way
My fitment was pretty bad but in other words, it is a replica product so you cannot expect much. My carbon fiber design was also off by noticeable 6 inches as one goes one way and another goes the opposite way
#24
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
This is the whole piece of rear diffuser replacing the oem one Or it is the overlay that attach to the oem by 3M tape?
#25
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
What is the size of your quad tips?
Thread
Thread Starter
Forum
Replies
Last Post