MikeFoxx

iTrader: (8)

I got these today and started the swap. Need a little help on the rear wires. The Kazz have wires for defrost but oem have 2 sets of wires. My question is on the oem there are letters by the 2 wire sections. One is a W the other is a B which is for defrost? I feel like B is defrost and W is auto dim but can find a solid confirmation.

<br > <br >

<br >

MikeFoxx

iTrader: (8)

Ehhhh it's late and I need mirrors for my drive to work. I'll figure it out later and update. Leaning on B for defrost which the mirrors have and no need for auto dim with these but I'll figure it out.

rkw77080

I see you have a "B" black connector, and a "W" white connector. I cannot make out the wire colors on your pictures, but here are the wiring diagrams. For the Glare-resistant, the wire colors are Brown and Black/Light Blue; for the heater, the wire colors are Brown/White and Black/Red.

Tom57

Mike, are you interested in selling the driver's side mirror?

MikeFoxx

iTrader: (8)

Thank you very much for this info. I will check them this weekend and post better pictures of the wires for everyone.

I will give it to you brotha... part of the reason why I got new mirrors was because the driver side had some odd discoloration to it. However, once I disconnected the wires the glass was clear of any blemishes and looked much better. Since I haven't used defrost I'm certain the anti glare is jacked on it. Not a huge issue but if you connect that wire you will see what I mean. PM me your cell number.