Notices
RX - 2nd Gen (2004-2009) Discussion topics related to the 2004 -2009 RX330, RX350 and RX400H models

2006 LEXUS RX330 Ball Joint replacement w/o touch axle

Thread Tools
 
Search this Thread
 
Old Oct 22, 2017 | 09:16 PM
  #1  
5W40's Avatar
5W40
Thread Starter
Driver
 
Joined: Jun 2015
Posts: 165
Likes: 28
From: BC Canada
Default 2006 LEXUS RX330 Ball Joint replacement w/o touch axle

2006 Lexus RX330 220K km, local city driving most of its lifetime. regular routine maintenance.

Preventive maintenance:Ball Joint

Last year I had noticed the leaking grease sign around ball joint when did engine oil change.


Brought a pair of MOOG ball joint and know later it is Made in Korea


Stuck castle nut and rusty cotter pin, 6-Point 19mm open end wrench can not break it free even with a hammer

Use reciprocating saw and chisel break it apart with effort.


Mod a universal ball joint separator



Perfect fit and press ball joint out




New one installed


Factory Ball Joint just has some grease leaking but no play, not too loose not too tight.


Not sure how long MOOG will last but time will tell.

Have fun!

Last edited by 5W40; Oct 23, 2017 at 12:51 PM.
Reply
Old Jan 11, 2025 | 10:59 PM
  #2  
joedaddy1's Avatar
joedaddy1
Racer
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2005
Posts: 1,981
Likes: 214
From: Orange County
Default

how are the ball joints doing now?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MisterSkiz
IS F (2008-2014)
20
Sep 17, 2023 08:42 PM
yotoy822
LS - 1st and 2nd Gen (1990-2000)
9
Sep 8, 2018 10:07 AM
MJHSC400
SC - 1st Gen (1992-2000)
44
Sep 23, 2009 05:05 PM
handzilla
GS - 2nd Gen (1998-2005)
19
Dec 16, 2007 09:50 AM
ttyR2
LS - 1st and 2nd Gen (1990-2000)
16
Nov 10, 2007 01:58 PM




All times are GMT -7. The time now is 12:34 PM.