ClubLexus - Lexus Forum Discussion - Search Results

 
Search: Posts Made By: ZOOT3D240
Showing results 1 to 25 of 29
Search took 0.03 seconds.
05-01-18, 09:03 PM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

Swapped ecus and ran the car today dident...

Swapped ecus and ran the car today dident misfire. Supposed to rain tomorro well see if it does. Heres a little clip driving around in 3rd and 4th gear https://youtu.be/CXiREixH2FU


am I not...
04-29-18, 10:45 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

so I put new injectors seals on the mk3...

so I put new injectors seals on the mk3 injectors. I did not rebuild them. They came off my buddy's car and it wwad running fine he just pulled them to go with bigger injectors. Woke up today and was...
04-22-18, 07:50 PM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

Did the same thing leaving work again.

Did the same thing leaving work again.
04-22-18, 09:51 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

So the past 3 days I've been driving the car to...

So the past 3 days I've been driving the car to work which is only 10minutes away from my home. Its been in 50s outside at 3oclock when i leave. Car starts up and runs perfect i drive it for about...
04-19-18, 10:32 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

So I finally got the engine to run correctly....

So I finally got the engine to run correctly. This things fkn fast. So I figured out the timing issue. it was simple I just forgot to trick the auto ecu back into "PARK" instead of DRIVE". In park is...
04-04-18, 10:25 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

hey thanks for the quick reply you guys are...

hey thanks for the quick reply you guys are awesome. so i did remove when i initially swapped over to tt ecu in december. i took it out cuz i thought dizzy was bad cauing ecu not to start but turns...
04-04-18, 09:42 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

so ive been trying to set base timing but when I...

so ive been trying to set base timing but when I jump e1 and te1 and check the timing with my timing light the timing mark looks like its about 15 degrees. if i move dizzy it will go to about 20 25....
03-21-18, 10:37 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

so i think i may have just set my aem uego...

so i think i may have just set my aem uego wideband wrong. who else is running one and what setting di you put it on. i had it set to p02 and i think its supposed to be set to p0
03-21-18, 09:54 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

im pulling -20 at idle and im pretty close to sea...

im pulling -20 at idle and im pretty close to sea level. I tried my spare ecu and its doing the same thing. once i find my other map sensor ill give that a go. I am also working on fixing my tig...
03-18-18, 09:38 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

yes i am running a 51trim borg warner

yes i am running a 51trim borg warner
03-17-18, 10:54 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

so i took my car out for a test drive. seems to...

so i took my car out for a test drive. seems to be running lean. at idle it my uego aem wideband will sit at 11.50 12ish. if rev up the engine 500rpms it strarts to lean out and. i did like 3 quick...
02-12-18, 08:33 PM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

Drumroll please, So i figured it out. reinstalled...

Drumroll please, So i figured it out. reinstalled 440s with lube on the gromet for the fuel rail. i had a ripped injector oring. also i had a bumch of vacume leaks. car runs great havent hit rev...
02-12-18, 09:35 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

So I tested the continuity of all the pins at the...

So I tested the continuity of all the pins at the ecu to the engine harness. Turns out i never had +5v sensor power going to tps and map. so now the engine revs up and idles good but there is one...
02-05-18, 12:51 PM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

starts up and runs. ill take a video in a few...

starts up and runs. ill take a video in a few minutes. Ive been looking for a na harness to go back and start over but no luck finding gs or sc to pull out of
02-04-18, 09:13 PM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

hey i was thinking do i have to repin my tps...

hey i was thinking do i have to repin my tps sensor? I am running na intake, tps and throttle body. Am i supposed to repin it to the gte ecu?


94 gs300 harness no trac non vvti to aristo 93 non...
01-31-18, 08:22 PM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

i did use a jumper when i set base timeing like...

i did use a jumper when i set base timeing like the first page
01-31-18, 10:23 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

not my picture but on the bottom right hand...

not my picture but on the bottom right hand theres the blue tape thats where i have it going into
01-31-18, 10:18 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

in between fuel pressure regulator and the intake...

in between fuel pressure regulator and the intake manifold after throttle body.
01-31-18, 10:00 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

ok 440s are installed and it runs exactly the...

ok 440s are installed and it runs exactly the same. pulled plug on tps while running and there is a change. pulled plug on iacv and theres no change. i noticed when i installed the injectors i had 4...
01-30-18, 09:16 PM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

I initially did not use a timing light. put light...

I initially did not use a timing light. put light on and it was flashing but no timing mark. took dizzy out rotated it alittle and went back to light, saw the timing mark and set it to 10. So that...
01-29-18, 08:27 PM
Replies: 7
Views: 290
Posted By ZOOT3D240

Check your connections at the ECU. Are all of...

Check your connections at the ECU. Are all of your wires soldered? Are the connections solid?

im gonna try to tee it in between fpr tomorro i had it on the coming off the plenum right next to the...
01-29-18, 10:02 AM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

checked vvti coils 1 wire is constant and the...

checked vvti coils 1 wire is constant and the other is pulsating like it should. went back to stock 330 ge injectors/wiring to eliminate the 440s being wired wrong. all 6 injectors are pulsating and...
01-29-18, 09:47 AM
Replies: 7
Views: 290
Posted By ZOOT3D240

checked vvti coils 1 wire is constant and the...

checked vvti coils 1 wire is constant and the other is pulsating like it should. went back to stock 330 ge injectors/wiring to eliminate the 440s being wired wrong. all 6 injectors are pulsating and...
01-10-18, 06:46 PM
Replies: 7
Views: 290
Posted By ZOOT3D240

Tt ecu swapp help

I wired up nonvvti aristo tt ecu on my 93 gs300 2jzge nonvvti. Previously i had the car running daily with stock usdm ecu and harness. First time i wired up the aristo ecu it would start and run on...
01-10-18, 01:41 PM
Replies: 3,609
Views: 687,446
Posted By ZOOT3D240

i thought it was that easy

i thought it was that easy
Showing results 1 to 25 of 29
 


 
Forum Jump

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.