2007 PB Edition / NJSteve / Build Page
08-29-18, 06:24 AM
#1
Driver
Thread Starter
2007 PB Edition / NJSteve / Build Page
I finally got around to start this page. It was tough not having a garage for the last few months.
Day I pick it up
First thing I did was fix the door over the ML radio / it was a loose connection on the switch
Did the resonator delete
Than added Injen air intake
completed the exhaust upgrade to add the S2000 Tips
Started cleaning the engine bay
Use the Habour Freight vacuum/blower combination
this came out of engine bay
Had this install last week still having issues with the system
But this is cool
Day I pick it up
First thing I did was fix the door over the ML radio / it was a loose connection on the switch
Did the resonator delete
Than added Injen air intake
completed the exhaust upgrade to add the S2000 Tips
Started cleaning the engine bay
Use the Habour Freight vacuum/blower combination
this came out of engine bay
Had this install last week still having issues with the system
But this is cool
08-29-18, 07:40 AM
#3
Lexus Test Driver
Did you change the exhaust or just add the tips?
they look good!
also, Is it louder with the open intake?
they look good!
also, Is it louder with the open intake?
08-29-18, 07:55 AM
#4
Lexus Test Driver
I just read up on the keyless system. Below is the installation manual.
from what I read, it sounds like you may have used the easy method for installation.
this involves leaving a key in the ignition and in the on position.
it also leaves the steering wheel unlocked.
power and starting are controlled by the new keyless system button.
the old ignition switch and key are hidden behind the old location.
am I correct or did they set it up another way?
https://www.digitalguarddawg.com/wp-...UAL%209.13.pdf
from what I read, it sounds like you may have used the easy method for installation.
this involves leaving a key in the ignition and in the on position.
it also leaves the steering wheel unlocked.
power and starting are controlled by the new keyless system button.
the old ignition switch and key are hidden behind the old location.
am I correct or did they set it up another way?
https://www.digitalguarddawg.com/wp-...UAL%209.13.pdf
08-29-18, 10:15 AM
#5
Lead Lap
Very nice.
08-29-18, 02:42 PM
#6
Driver
Thread Starter
08-29-18, 02:44 PM
#7
Driver
Thread Starter
I just read up on the keyless system. Below is the installation manual.
from what I read, it sounds like you may have used the easy method for installation.
this involves leaving a key in the ignition and in the on position.
it also leaves the steering wheel unlocked.
power and starting are controlled by the new keyless system button.
the old ignition switch and key are hidden behind the old location.
am I correct or did they set it up another way?
https://www.digitalguarddawg.com/wp-...UAL%209.13.pdf
from what I read, it sounds like you may have used the easy method for installation.
this involves leaving a key in the ignition and in the on position.
it also leaves the steering wheel unlocked.
power and starting are controlled by the new keyless system button.
the old ignition switch and key are hidden behind the old location.
am I correct or did they set it up another way?
https://www.digitalguarddawg.com/wp-...UAL%209.13.pdf
Trending Topics
01-28-19, 10:20 AM
#9
Driver
Thread Starter
I live in Wayne bought the car in July
I had a fire at my old house last February
bought a new house in August been working on the house since
my car has been sitting in the garage since August
without a battery had to buy a new motor for the top
planning to put back together next month
just scored a 05 red engine cover and a trunk cover with red handel on Ebay this week
i check the forum almost every day don’t post as much as I would want
I had a fire at my old house last February
bought a new house in August been working on the house since
my car has been sitting in the garage since August
without a battery had to buy a new motor for the top
planning to put back together next month
just scored a 05 red engine cover and a trunk cover with red handel on Ebay this week
i check the forum almost every day don’t post as much as I would want
01-28-19, 10:38 AM
#10
Driver School Candidate
O wow, Yea I seen the pics sorry to hear that. O the motor for the convertible Part, it just stopped working, Yea Mine has been in the garage All winter I will bring it out in spring sometime, I live in North bergen, I seen the red engine cover its nice.
02-03-19, 02:50 PM
#15
That key is awesome! How did you get it?