Modded/Damaged PPE Headers
 

SOLD
Hello all,
As the title says up for sale are a set of PPE LS 400 headers Modded to fit on an SC. These will fit on an SC400. HOWEVER, as stated on the FIGS Engineering website you have to mod the cats in.An extra O2 sensor threaded hole has been added for these headers to fit on an SC.
THE HEADERS AR DAMAGED. there are a few hair-line cracks allong both collectors and a couple of small dents. These headers were in an accident. Impact caused a shift of the engine they were on and with the high heat of the exaust flowing through them small cracks formed within the collectors.
A good welder would be able to fix these. As you can see in the pics the cracks are relatively small and confined in one area. The dents are so minor they do not impede flow at all.
Selling these for SOLD bucks firm.
This is the lowest I can go.
Allready loosing a huge ton of money on these and I don't have time to get em fixed myself.
The cost of fixing them should be relatively cheap. Another option would be to go to a fence shop on the off season and ask them to fix the headers for you for a cheap price. These guys are used to welding inside of pipes, fences, etc. And should have no problem fixing these.
More pic available upon request the cracks are really small so it's hard to get a good pic of them.

https://cimg1.ibsrv.net/gimg/www.clu...dbd3bbea58.jpg

Added lower O2 hole


https://cimg5.ibsrv.net/gimg/www.clu...0ec4457cfd.jpg


Headers


https://cimg8.ibsrv.net/gimg/www.clu...a40640e193.jpg


Crack 1


https://cimg2.ibsrv.net/gimg/www.clu...7a9b700852.jpg


Crack 2


https://cimg6.ibsrv.net/gimg/www.clu...b82b8bc93f.jpg


Crack 3




https://cimg0.ibsrv.net/gimg/www.clu...b602a039d9.jpg


https://cimg4.ibsrv.net/gimg/www.clu...e020361b40.jpg

Modded/Damaged PPE Headers
 

Hello all,
As the title says up for sale are a set of PPE LS 400 headers Modded to fit on an SC. These will fit on an SC400. HOWEVER, as stated on the FIGS Engineering website you have to mod the cats in. An extra O2 sensor threaded hole has been added for these headers to fit on an SC.
THE HEADERS AR DAMAGED. there are a few hair-line cracks along both collectors and a couple of small dents. These headers were in an accident. Impact caused a shift of the engine they were on and with the high heat of the exhaust flowing through them small cracks formed within the collectors.
A good welder would be able to fix these. As you can see in the pics the cracks are relatively small and confined in one area. The dents are so minor they do not impede flow at all.
Selling these for $200 bucks firm.
This is the lowest I can go.
Allready loosing a huge ton of money on these and I don't have time to get em fixed myself.
The cost of fixing them should be relatively cheap. Another option would be to go to a fence shop on the off season and ask them to fix the headers for you for a cheap price. These guys are used to welding inside of pipes, fences, etc. And should have no problem fixing these.
More pic available upon request the cracks are really small so it's hard to get a good pic of them.

https://cimg1.ibsrv.net/gimg/www.clu...dbd3bbea58.jpg

Added lower O2 hole


https://cimg5.ibsrv.net/gimg/www.clu...0ec4457cfd.jpg


Headers


https://cimg8.ibsrv.net/gimg/www.clu...a40640e193.jpg


Crack 1


https://cimg2.ibsrv.net/gimg/www.clu...7a9b700852.jpg


Crack 2


https://cimg6.ibsrv.net/gimg/www.clu...b82b8bc93f.jpg


Crack 3




https://cimg0.ibsrv.net/gimg/www.clu...b602a039d9.jpg


https://cimg4.ibsrv.net/gimg/www.clu...e020361b40.jpg

................
 

Bump...................

Bump.......

What were these originally made for? What year LS if they were made for one?

Sup Drifter, been a while..
According to PPE these were orginally made for an LS 400. I had a PM that they had sent me verifying it but It got deleted.

I'm going to ask PPE again to verify what they (headers) fit on.

I have merged this thread with your other one as you cannot have duplicate FS threads in multiple forums. If you would like this moved to another forum please PM me.

Ahhh ok I apologize for that. I will PM you.

want the headers
 

Do you still have them for sale and how much would shipping be to 78724 zip

Yes still for sale.
PM' ed

Bump...................

Sold? If not, wondering about shipping to 30122. Thanks!

Still available.

Sent you a PM on this.

PM's replied.