fried_rice

iTrader: (20)

I'm doing motor swap, selling leftover parts, Prices OBO

$50-2JZ-GE ECU
$100-Complete 2JZ-GE head, with Intake manifold etc.,
$50-GS300 2JZ-GE harness
$75- SC400 complete driveshaft
$75- W58 Supra complete driveshaft
$200- Brand new, 0 miles, KYB GR-2 / Excel-G struts front and rear SC/Supra (Used my coilovers)
$60- Stock shocks, look to be in decent shape
$200-Complete rear subframe( taking off the some parts listed above)
$100- Front and rear hubs
$70-97+ Supra motor mounts

I also have quite a few misc GE parts sitting around if you need something send me a PM.

SOLD
SOLD $200- 2JZ-GE Short Block
SOLD $450-Twin Bosch 044 fuel system for SC300

blacksc

interested in some parts
text me at 832-436-5501

AlaskaUSA

What's the condition age of the pumps? What hp are they set up for? Looks like one intank and one out? In line.. Would it still push the same hp and flow that way?
What's all included? Thx

fried_rice

iTrader: (20)

One pump is intake with a custom made hanger and the other pump is inline with -10AN line to dual -8AN for the rail. This setup works well for high horsepower levels up to 800 hp on race gas. Custom wiring and relays make it plug and play. It also has the filter and everything is E85 compatible. I'm not entirely sure of the age but they are low mileage, and in great shape, stored in my house.

AlaskaUSA

Interested in the he motor and harness ac plugs still there? Ship to Vegas?
Plus the shocks springs and maybe drive shaft. Do u have the diff?

fried_rice

iTrader: (20)

Yes, all engine plugs are on the harness. I have the AC, though I've never used it so I'm unsure of it's condition. I have an auto rear diff. These drive shafts will only work with a Supra 5spd or SC400, unfortunately they are not interchangeable like the SC300 DS.

I can ship anywhere in the US. I'm not sure if Fastenall ships to the West coast, if they did I could likely get the shipping under $150 for the motor and everything. Through a freight company it may be closer to $250.

truviethug

iTrader: (1)

how much for the rear bumper shipped to 01801

fried_rice

iTrader: (20)

I'm getting a quote from Fastenall to ship an engine right now, I'll see if they can quickly compute the bumper as well. I'm guessing $50 for shipping.

sc300bigtx

iTrader: (13)

Would you part with a set of the motor mount brackets from the motor for a sc300

94_soarer

iTrader: (8)

That sucks i wanted the fuel setup

1UZFEric

PM'd RE: 2JZ

fried_rice

iTrader: (20)

Bump this up