MO FS: BC BR Coilovers
#1
FS: BC BR Coilovers
Looking for $795 shipped to lower 48 OBO. Please feel free to PM me or reply here for any questions or further pictures. Call/text (636)734-4618 and I'll get back as soon as I can. I am easy to work with.
INFO: I am being as thorough and honest as possible. Feel free to let me know if I left anything out.
They have 8k miles on them, installed April 2013. They were on the car for roughly 13 months. There is some light surface rust on the bottom of the springs, where they coil closely and trap water/debris. I cleaned my wheel wells once a month since ownership, and before installing, I applied Zaino paint sealant to all painted surfaces of each assembly. Prior to this sale, I took each assembly apart and cleaned with S100 Degreaser/soft toothbrush, then rinsed/blow dried, followed by spraying a light amount of WD40's equivalent of PB Blaster in the threads of every locking ring/spring perch. If anyone cares, I am selling them because I do not want to risk rubbing/scraping the body of my new 1997 5 speed SC (fairly rare) while also recently doing an interior swap, I am afraid the interior will rattle apart etc. and I like the stock ride's comfort.
The rates are 14k front and 10k rear. The locking rings barely show any wear because I only adjusted the height one time directly after install. I adjusted the preload to 6mm after cleaning them. Can ship in original box.
To people in CA: Please take into consideration that the Midwest has much less SC parts in circulation. I understand that SC parts are abundant on the west coast/fl, but please note that I am up for reasonable offers as well Thanks!
INFO: I am being as thorough and honest as possible. Feel free to let me know if I left anything out.
They have 8k miles on them, installed April 2013. They were on the car for roughly 13 months. There is some light surface rust on the bottom of the springs, where they coil closely and trap water/debris. I cleaned my wheel wells once a month since ownership, and before installing, I applied Zaino paint sealant to all painted surfaces of each assembly. Prior to this sale, I took each assembly apart and cleaned with S100 Degreaser/soft toothbrush, then rinsed/blow dried, followed by spraying a light amount of WD40's equivalent of PB Blaster in the threads of every locking ring/spring perch. If anyone cares, I am selling them because I do not want to risk rubbing/scraping the body of my new 1997 5 speed SC (fairly rare) while also recently doing an interior swap, I am afraid the interior will rattle apart etc. and I like the stock ride's comfort.
The rates are 14k front and 10k rear. The locking rings barely show any wear because I only adjusted the height one time directly after install. I adjusted the preload to 6mm after cleaning them. Can ship in original box.
To people in CA: Please take into consideration that the Midwest has much less SC parts in circulation. I understand that SC parts are abundant on the west coast/fl, but please note that I am up for reasonable offers as well Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
soulific
CT200H Classifieds
6
07-10-18 11:20 AM
KOIS
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
8
08-10-15 09:40 AM
S2dannyKeo
2Gen GS430 / 400/ 300 Classifieds (98-05)
1
08-21-13 09:32 PM
VNN326
LS460 / 430 / 400 / 600h Classifieds
1
07-30-13 10:47 PM
1STLXS
3Gen GS460 / 450H / 430 / 350 / 300 Classifieds (06-12)
10
05-05-11 12:04 AM