W58 Driveshaft+flex plate // W58 Competition Clutch Kit+Flywheel // 1JZ Alternator+++
W58 Drive Shaft from 99 SC300 w/ Flex Plate and Center Bearing - $160 shipped (Will part out flex plate)
W58 Flywheel Recently Resurfaced - $200 Shipped Brand new MSD Tach Adapter still in wrapping from Drift Motion - $45 shipped SC300 AC Control Unit - $35 Shipped (Works perfect, Has half the screen bleeding, orange.) 1JZ Alternator(Round plug) - $100 shipped https://scontent-a-mia.xx.fbcdn.net/...74366653_n.jpg https://scontent-b-mia.xx.fbcdn.net/...93635771_n.jpg https://scontent-a-mia.xx.fbcdn.net/...03951145_n.jpg https://fbcdn-sphotos-g-a.akamaihd.n...29106501_n.jpg https://scontent-a-mia.xx.fbcdn.net/...80716501_n.jpg https://fbcdn-sphotos-b-a.akamaihd.n...05395178_n.jpg http://sphotos-b.xx.fbcdn.net/hphoto...25935036_n.jpg https://www.clublexus.com/forums/att...0724-2305.jpeg https://www.clublexus.com/forums/att...0724-2305.jpeg |
Flywheel is pending sale fellas! Hurry before it's gone.
|
Clutch kit is sold (not the flywheel). First come first serve. Everything but the clutch disk and pressure plate is still available!
|
Bump purchased the clutch kit it was exactly as described. Bleak also ships the items pretty fast and provides the tracking numbers
|
Thanks again man! Still have everything but the clutch kit available.
|
bump~ happy holidays!
|
bump still for sale
|
new years bump! send me offers!
|
bump still got the goodies
|
you still have the driveshaft? swaping my sc400 to manuel w58 but i dont have the drivesahft. wil you ship to norway? price?
|
Originally Posted by Holger
(Post 8316943)
you still have the driveshaft? swaping my sc400 to manuel w58 but i dont have the drivesahft. wil you ship to norway? price?
|
bump still gots!
|
bumppp.. offer up on the items listed.
|
Originally Posted by Bleak
(Post 8348895)
bumppp.. offer up on the items listed.
|
Originally Posted by Slid3ways
(Post 8349789)
Ill but driveshaft. However ive been sold 2 wrong onea. Can you measure the front half and send a pic via pm so i can verify its the correct length.
Hey Slide3ways, I measured the front from the spindle tip to the joint where it connects to the rest of the half, and the whole entire length in two photos. The entire DShaft from the flex plate to the other end is 51" across. https://scontent-a-iad.xx.fbcdn.net/...17210333_n.jpg The front half, depends on where you're counting from, but it's 19" from tip to center bearing. https://scontent-b-iad.xx.fbcdn.net/...39822257_n.jpg This was from a 99SC300 and is still very fresh. If you like what you see, My Paypal info is mark.laststance@gmail.com Please send the $160 as gift or add paypal fees. |
All times are GMT -7. The time now is 05:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands