Dx3

iTrader: (13)

Parts are from a green/tan 93 SC300 auto with rear end damage and 151k on chassis. Parts not available are:

Rear bumper
Trunk
ECU
Drivers LCA
Steering Rack

Available parts are listed below. There are many more but this is what came to mind. Prices are all OBO, but I would rather just keep them than give them away. Lowballers will be ignored. Buyer responsible for paypal fees. I have guessed the prices for some of these parts as I have never had to buy or sell some of them, so if they aren't reasonable please let me know. Just bear in mind this isn't my first time around the SC block


Pass fender - $100 + shipping
PS Pump - $110 shipped
Pass door lock actuator - $85 shipped
Driver door lock actuator - $85 shipped
Climate control (has bleeding) - $30 shipped
Pass interior door panel - $100 + shipping
Radiator - $100 + shipping
Brand newly rebuilt AC compressor - $100 + shipping
Alternator - $110 shipped
Driver exterior mirror - $55 shipped
Driver exterior door handle - $35 shipped
Front Bumper - $100 + shipping
Drivers front wheel well liners - $40 + shipping
Passenger front wheel well liners - $40 + shipping
Auto shifter - SOLD
Transmission - PENDING
Exterior Pass door handle - SOLD
ECU - SOLD
Cruise Control - SOLD
Windshield Washer Reservoir - SOLD
2jzge motor with 153k (no accessories) - SOLD
Headlights - SOLD
Rearview Mirror - SOLD
Drivers fender - SOLD
Cluster (see pic below) - SOLD
Drivers interior door panel - SOLD
Center console trim - SOLD

Many more parts - just ask

Jonny

ScottURnot

iTrader: (33)

Hey Jonny, How do the headlights look? any broken tabs? Yellow? Interested.

Dx3

iTrader: (13)

Scott,

I will give them a thorough look over this evening when I return home from work and will let you know Regards,
Jonny

captainsc

iTrader: (1)

How is the drivers side door panel? I will take it if it is mint.

Dx3

iTrader: (13)

It is not mint unfortunately. It has some wear on the armrest if I recall. I will take a better look when I get home from work and try to get pictures.

Jonny

captainsc

iTrader: (1)

If it is just wear on the armrest that is fine. I dont need the wood either. My main concern is that the front section has no cracks or broken tabs. If you can get pics that would be great. Thank you!

Dx3

iTrader: (13)

Scott - give me 30 mins with PlastX and my Porter Cable and I should be able to get them pretty shiny. As for the top tab, one is good and one is broken. The broken one is not completely destroyed though so a bolt would still hold it in place. I wasn't aware of any other tabs on there...







The armrest has wear, and I noticed this imperfection shown in the picture. Also, there is a little crack on the mirror control joystick type thing on the master switch. Apart from that it looks to be in good shape

Jonny

captainsc

iTrader: (1)

So other than the scratch on the vinyl no actual cracks in the door panel? If the plastic is not actually cracked ill take it.

hahn67

i need a e brake **** i just bought a sc and the previous owners dog chewed on the e brake ****

Dx3

iTrader: (13)

Hey man - these were the only imperfections I saw. Which plastic are you talking about? I will pull the door panel off tonight, give it a wipe down and verify there is no other damage. Cool?

E Brake ****? As in the parking brake lever with the release button?
Jonny

captainsc

iTrader: (1)

Sounds good to me. What I am referring to is the actual plastic structure of the panel. Pretty much though it seems like you've given me a good overlook of it. Once you take it off let me know and Ill send payment asap. Thanks!

Li Ls4

iTrader: (12)

do the needles still work on the cluster? my rpm needle wont go past 1k so i was thinking of just replacing it from another cluster.

Dx3

iTrader: (13)

Will do sir

I will verify this evening that they work. I know there are some bulbs out, just not sure about needles...

Jonny

Dx3

iTrader: (13)

If you are satisfied with the condition my paypal is drinkdontdrive@aol.com

Regards,
Jonny

hahn67

yah just the e brake release button