♠♠♠ WTB: Turbo essentials or a kit... ♠♠♠
11-20-07, 08:30 PM
#1
Lead Lap
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: Arkansas
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
♠♠♠ WTB: Turbo essentials or a kit... ♠♠♠
Rents just ok'd the turbo project and were even kind enough to partially fund it. Im going for the best prices, as far as manifolds, ic piping, ic, and downpipes they dont really matter. As long as they're cheap then im down. However, im looking for a quality turbo, wastegate and bov. Im willing to peice this kit together so if you have one or two of the items im looking for, chime in. If you have a really really cheap kit that you want to get rid of, them im down as well. I have cash ready via paypal and remember, the cheaper the better!
Setup im looking for:
~Turbo that pushes 300 horses at around 9 psi LOOKING FOR A T57!!
~Quality Bov/Wastegate-BOUGHT
~Really like turbonetics ic piping, i really dont want to do the universal kits...-BOUGHT
~Downpipe, doesnt matter, any kind that will fit the turbo ill be using
~Safc2 (ill prolly get this off ebay unless someone wants to sell theirs for like $90)
~AEM Wideband (once again, ill prolly be buying this off ebay..)
~Ill prolly be getting a t4 flanged turbo so any manifold with a t4 flange will be ideal unless i go with like a te44 or something of that nature.
~Front mount inner cooler, manufacturer doesn't matter, just as long as its a fmic
-BOUGHT
Setup im looking for:
~Turbo that pushes 300 horses at around 9 psi LOOKING FOR A T57!!
~Quality Bov/Wastegate-BOUGHT
~Really like turbonetics ic piping, i really dont want to do the universal kits...-BOUGHT
~Downpipe, doesnt matter, any kind that will fit the turbo ill be using
~Safc2 (ill prolly get this off ebay unless someone wants to sell theirs for like $90)
~AEM Wideband (once again, ill prolly be buying this off ebay..)
~Ill prolly be getting a t4 flanged turbo so any manifold with a t4 flange will be ideal unless i go with like a te44 or something of that nature.
~Front mount inner cooler, manufacturer doesn't matter, just as long as its a fmic
-BOUGHT
Last edited by 100mgbluep; 11-22-07 at 07:35 PM.
11-20-07, 08:37 PM
#2
Registered User
Join Date: Sep 2006
Location: s
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
club na-t has the turbo xs kit for 1299 or you can be like me and get an ebay manifold, tial wastegate and greddy, t-netics, garrett turbo and brace the manifold if you want but its not required then the drift motion / ebay ssqv copy bov is good for the price then ebay front mount with the sc300 intercooler piping and your set.
11-21-07, 06:05 PM
#6
Lead Lap
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: Arkansas
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
I know its going to cost me a lot more than $400 to put together a kit. I was just saying that im trying to save as much cash as possible so i can be boosted on my budget
Trending Topics
11-22-07, 07:37 PM
#8
Lead Lap
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: Arkansas
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
list updated. Im sitting here with turbonetics ic piping, inner cooler, waste gate, bov and turbo for $400. I still need all electronics, a t57 w/downpipe (willing to trade the T04E60 for a t57), t4 manifold, and magnaflow mufflers.
Last edited by 100mgbluep; 11-22-07 at 07:40 PM.
11-24-07, 08:04 PM
#10
Lead Lap
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: Arkansas
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
Im almost positive that it has a problem with it. I wont be able to confirm that until next week. But from what it sounds like it needs new seals, so around $200.
Thread
Thread Starter
Forum
Replies
Last Post