Cosmis XT-206R who's running them?
#1
Cosmis XT-206R who's running them?
So I've got a 93 SC300, did a 2jzgte / R154 swap and now it's finally time to freshen up the look! So who runs these Cosmis wheels? I have seen them on a few SC's for a while now, just trying to figure out which ones to order now...and I am completely illiterate when it comes to wheel fitments
https://www.cosmisusa.com/shop/xt-206r-2/
Any help is very appreciated!!!
https://www.cosmisusa.com/shop/xt-206r-2/
Any help is very appreciated!!!
#6
I was just talking to my brother about that LS400 BBK, I do plan on doing an upgrade. How will that affect the fitment? That's actually who I plan on purchasing through, he said the same. Now to decide, do the 18x9.5 +10 in the rear and the 18x9 +33 in the front? or do the 18x9.5 +10 all around? Going to post a photo of my car here in a min!
Trending Topics
#8
Pole Position
iTrader: (3)
I was just talking to my brother about that LS400 BBK, I do plan on doing an upgrade. How will that affect the fitment? That's actually who I plan on purchasing through, he said the same. Now to decide, do the 18x9.5 +10 in the rear and the 18x9 +33 in the front? or do the 18x9.5 +10 all around? Going to post a photo of my car here in a min!
I'm running 18x9 in the front and 18x10 in the back and I rolled all four corners as a precaution and I'm glad I did.
I plan on purchasing a set of XT206r with a stagger fitment because of the LS400 BBK and the fact that I like having a wider wheel in the back especially with a Supra TT LSD in the rear.
The LS400 is wider than the OEM calipers up front so you'll need a slightly wider offset in the front. There are plenty of threads that go into more detail, I don't want to give you possibly wrong information.
#9
Well it depends on a few factors...mainly being if you to roll your fenders or not?
I'm running 18x9 in the front and 18x10 in the back and I rolled all four corners as a precaution and I'm glad I did.
I plan on purchasing a set of XT206r with a stagger fitment because of the LS400 BBK and the fact that I like having a wider wheel in the back especially with a Supra TT LSD in the rear.
The LS400 is wider than the OEM calipers up front so you'll need a slightly wider offset in the front. There are plenty of threads that go into more detail, I don't want to give you possibly wrong information.
I'm running 18x9 in the front and 18x10 in the back and I rolled all four corners as a precaution and I'm glad I did.
I plan on purchasing a set of XT206r with a stagger fitment because of the LS400 BBK and the fact that I like having a wider wheel in the back especially with a Supra TT LSD in the rear.
The LS400 is wider than the OEM calipers up front so you'll need a slightly wider offset in the front. There are plenty of threads that go into more detail, I don't want to give you possibly wrong information.
Speaking of which I just got my hands on a Tomei LSD that will be going in
No worries, I will be doing some measurements once I get the car back from the tuner, hopefully soon... What offsets are you looking at?
#11
live.love.laugh.lexus
iTrader: (42)
full shot: https://www.clublexus.com/forums/sc-...ml#post9206184
as much as I like them, I think they're just very heavy
as much as I like them, I think they're just very heavy
#12
Pole Position
iTrader: (3)
I won't mind rolling fenders and removing the liners if I have to. I however want to avoid pulling my rear fenders and I have a fear of bacon fenders. If I have to mod the front fenders I won't mind, they are replaceable. lol
Speaking of which I just got my hands on a Tomei LSD that will be going in
No worries, I will be doing some measurements once I get the car back from the tuner, hopefully soon... What offsets are you looking at?
Speaking of which I just got my hands on a Tomei LSD that will be going in
No worries, I will be doing some measurements once I get the car back from the tuner, hopefully soon... What offsets are you looking at?
18x11 +8 in the rears. My rears are already rolls slightly to prevent scrubbing in the rears.
#13
full shot: https://www.clublexus.com/forums/sc-...ml#post9206184
as much as I like them, I think they're just very heavy
as much as I like them, I think they're just very heavy
#15
Pole Position
iTrader: (5)
I'll post some pics after I get these installed in a few weeks, I ordered 18x11 +8 for the rear and 18x9.5 +10 in the front, but I will attempt to fit 305s on the rear haha:
http://iraceautosports.com/product/c...ibeau-edition/
http://iraceautosports.com/product/c...ibeau-edition/